Features at a Glance
- Clever inclusive mounting technology
- Simple installation
- Glossy objects can be detected
- IO-Link 1.1
- Minimal installation space
OLDK503A0002 Retro-Reflex Sensor Universal
Available from stock
Added to Your Cart:
A reflector must be used in combination with these sensors. They can be installed in all kinds of industrial environments thanks to ample functional reserve. Even reflective objects can be reliably recognized through the use of polarized light.
Optical Data | |
|---|---|
| Range | 5,000 mm |
| Reference Reflector/Reflector Foil | RQ100BA |
| Switching Hysteresis | < 15 % |
| Light Source | Red Light |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
| Opening Angle | 5 ° |
| Light Spot Diameter | see Table 1 |
| Two-Lens Optic | yes |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Supply Voltage with IO-Link | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 30 mA |
| Switching Frequency | 700 Hz |
| Switching frequency (speed mode) | 900 Hz |
| Response Time | 0.7 ms |
| Response time (speed mode) | 0.6 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -25 ... 60 °C |
| Switching Output Voltage Drop | < 2.5 V |
| PNP Switching Output/Switching Current | 200 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Plastic, ABS/GF |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Weight | 17 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 2,953.75 a |
General Data | |
|---|---|
| Scope of delivery |
1 × Z0008 mounting console 1 × initial start-up instructions 1 × MUTTER-M8-E002 hex nut 1 × sensor |
| Packaging unit | 1 Piece |
Output | |
|---|---|
| IO-Link | yes |
| PNP NC, PNP NO | yes |
Adjustable parameters | |
|---|---|
| Output |
Push-pull NPN PNP |
| Circuit |
NC NC+NO NO |
| Other parameters |
Off-delay On-delay Mode of operation Error output Switching hysteresis Emitted light |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
*IO-Link availability is valid for all sensors from revision G. The revision can be found in the production order number “xxxxx/G/xxxxxx,” which is indicated on the product label.
Table 1 |
|||
|---|---|---|---|
| Working Distance | 0,2 m | 0,5 m | 5 m |
| Light Spot Diameter | 17 mm | 35 mm | 330 mm |
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
05 = Switching Distance Adjuster
30 = Switching Status/Contamination Warning 68 = Power LED |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
|
Reflector data | |
|---|---|
| RQ100BA | 0.01 ... 5 m |
| RE18040BA | 0.01 ... 4.5 m |
| RQ84BA | 0.01 ... 4.5 m |
| RR84BA | 0.01 ... 4.5 m |
| RE9538BA | 0.01 ... 2.2 m |
| RE6151BM | 0.01 ... 4.3 m |
| RR50_A | 0.01 ... 3.5 m |
| RE6040BA | 0.01 ... 4 m |
| RE8222BA | 0.01 ... 2.6 m |
| RR34_M | 0.01 ... 2.5 m |
| RE3220BM | 0.01 ... 1.5 m |
| RE6210BM | 0.01 ... 1 m |
| RR25_M | 0.01 ... 1.3 m |
| RR25KP | 0.04 ... 0.8 m |
| RR21_M | 0.01 ... 1.1 m |
| ZRAE02B01 | 0.01 ... 2.2 m |
| ZRDS01R01 | 0.05 ... 0.8 m |
| ZRME01B01 | 0.01 ... 0.5 m |
| ZRME03B01 | 0.01 ... 2.5 m |
| ZRMR02K01 | 0.01 ... 0.7 m |
| ZRMS02_01 | 0.01 ... 1 m |
| RF505 | 0.05 ... 1.5 m |
| RF255 | 0.05 ... 1.1 m |
| RF508 | 0.05 ... 1.5 m |
| RF258 | 0.05 ... 1.1 m |
| RF4050 | 0.05 ... 1 m |
| ZRAF07K01 | 0.05 ... 1.1 m |
| ZRAF08K01 | 0.05 ... 1.5 m |
| ZRDF03K01 | 0.04 ... 3.4 m |
| ZRDF10K01 | 0.04 ... 4.5 m |
Complementary Products |
|---|
|
ECAD data
