Features at a Glance
- Glossy objects can be detected
- Micro-design
- Contamination warning
- Integrated output
LB66PC7 Retro-Reflex Sensor Universal
Available from stock
Added to Your Cart:
A reflector must be used in combination with these sensors. They can be installed in all kinds of industrial environments thanks to ample functional reserve. Even reflective objects can be reliably recognized through the use of polarized light.
Optical Data | |
|---|---|
| Range | 1,300mm |
| Reference Reflector/Reflector Foil | RQ100BA |
| Switching Hysteresis | < 15% |
| Light Source | Red Light |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000h |
| Max. Ambient Light | 10,000Lux |
| Two-Lens Optic | yes |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 20mA |
| Switching Frequency | 1,800Hz |
| Response Time | 270µs |
| Temperature Drift | < 10% |
| Temperature Range | -10 ... 60°C |
| Switching Output Voltage Drop | < 2.5V |
| PNP Switching Output/Switching Current | 100mA |
| Residual Current Switching Output | < 50µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Housing Material | Stainless steel, V2A (1.4305 / 303) |
| Degree of Protection | IP67 |
| Connection | M8 × 1; 4-pin |
| Weight | 6g |
General Data | |
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × MUTTER-M8-E002 hex nut 1 × sensor |
Output | |
|---|---|
| PNP NO | yes |
Adjustable parameters | |
|---|---|
| Circuit |
NC NC/NO NO |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Table 1 |
|||
|---|---|---|---|
| Working Distance | 200 mm | 500 mm | 1000 mm |
| Light Spot Diameter | 35 mm | 80 mm | 160 mm |
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
30 = Switching Status/Contamination Warning
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
3 = Switching Status Indicator
|
Reflector data | |
|---|---|
| RQ100BA | 0.02 ... 1.3m |
| RE18040BA | 0.02 ... 1m |
| RQ84BA | 0.01 ... 1.1m |
| RR84BA | 0.02 ... 1m |
| RE9538BA | 0.01 ... 0.6m |
| RE6151BM | 0 ... 1.1m |
| RE6151BA | 0.02 ... 0.6m |
| RR50_A | 0 ... 0.8m |
| RE6040BA | 0.01 ... 0.8m |
| RE8222BA | 0.02 ... 0.7m |
| RR34_M | 0.01 ... 0.5m |
| RE3220BM | 0 ... 0.5m |
| RE6210BM | 0.01 ... 0.3m |
| RR25_M | 0.01 ... 0.4m |
| RR25KP | 0.01 ... 0.25m |
| RR21_M | 0.01 ... 0.25m |
| ZRAE02B01 | 0.02 ... 0.6m |
| ZRME01B01 | 0.01 ... 0.2m |
| ZRME03B01 | 0.02 ... 0.6m |
| ZRMR02K01 | 0.01 ... 0.25m |
| ZRMS02_01 | 0.01 ... 0.3m |
| RF505 | 0.02 ... 0.4m |
| RF255 | 0.02 ... 0.3m |
| RF508 | 0.03 ... 0.5m |
| RF258 | 0.03 ... 0.4m |
| ZRDF__K01 | 0.03 ... 1m |
Complementary Products |
|---|
|
ECAD data
