text.skipToContent text.skipToNavigation

TM55NCT2 Reflex Sensor Energetic

Available from stock
The transmitter and receiver in these sensors are located in a single housing. The sensor evaluates transmitted light reflected back from the object. The output is switched as soon as an object passes the selected range. Bright objects reflect more light than dark objects, and can thus be recognized from greater distances.

Optical Data

Range 500 mm
Switching Hysteresis  < 15 %
Light Source Infrared Light
Wavelength 850 nm
Service Life (T = +25 °C) 100,000 h
Max. Ambient Light 10,000 Lux
Opening Angle 12 °

Electrical Data

Supply Voltage 10 ... 30 V DC
Current Consumption (Ub = 24 V) < 40 mA
Switching Frequency 1 kHz
Response Time 500 µs
On-/Off-Delay (RS-232) 0 ... 5 s
Temperature Drift < 10 %
Temperature Range -25 ... 60 °C
Switching Output Voltage Drop < 2.5 V
NPN Switching Output/Switching Current 100 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Lockable yes
Teach Mode NT, MT
Protection Class III

Mechanical Data

Setting Method Teach-In
Housing Material Plastic, PBT
Full Encapsulation yes
Degree of Protection IP67
Connection M12 × 1; 4-pin
Weight 55 g

Output

NPN NO yes
RS-232 with Adapterbox yes

Adjustable parameters

Circuit NC
NC/NO
NO
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Connection Diagram

Ctrl. Panel

30 = Switching Status/Contamination Warning
06 = Teach Button

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Receiver Diode 2 = Transmitter Diode Screw M4 = 1 Nm

Complementary Products

  • Adapterbox A232
  • Software
Initial start-up instructions
Operating instructions
Interface protocol
Interface protocol
Interface_Protocol_diverse_Types.pdf
Declarations of Conformity / Approvals
Product Comparison