P1KY011 Laser Distance Sensor Time of Flight

Available from stock

Added to Your Cart:

Added to your request list:

These miniature sensors determine distance between the sensor and the object by means of transit time measurement. wenglor's interference-free technology (wintec) is revolutionizing sensor technology: it prevents numerous sensors arranged directly opposite or next to each other from interfering with one another. The sensors reach a very high switching frequency and use laser class 1, which is safe for the human eye.

This product has been discontinued, but is still available as a spare part.

Features at a Glance

No mutual interference with wintec
Interference-free towards gloss in the background with wintec
Reliable in case of glossy objects with wintec
Miniature design

Technical data

Optical Data
Working Range	0 ... 1,000 mm
Setting Range	100 ... 1,000 mm
Switching Hysteresis	< 40 mm
Light Source	Laser (red)
Wavelength	680 nm
Service Life (T = +25 °C)	100,000 h
Laser Class (EN 60825-1)	1
Beam Divergence	< 16 mrad
Triple Dot Laser	yes
Reflector required	no

Electrical Data
Supply Voltage	10 ... 30 V DC
Current Consumption (Ub = 24 V)	< 30 mA
Switching Frequency	1,000 Hz
Response Time	0.5 ms
Temperature Drift	< 2.5 %
Temperature Range	-40 ... 60 °C
Number of Switching Outputs	2
Switching Output Voltage Drop	< 2.5 V
PNP Switching Output/Switching Current	100 mA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Protection Class	III
FDA Accession Number	1620293-001

Mechanical Data
Setting Method	Potentiometer
Housing Material	Plastic, ABS/PC Plastic, PC
Cable Jacket Material	Plastic, PUR
Optic Cover	Plastic, PMMA
Degree of Protection	IP67
Connection Type	1 plug with cable
Connection	M12 × 1; 4-pin
Cable length (L)	200 mm
Weight	41 g

Safety-relevant Data
MTTFd (EN ISO 13849-1)	996.97 a

General Data
Scope of delivery	1 × BEF-SET-01 mounting set 1 × initial start-up instructions 1 × sensor

Output
PNP NC, PNP NO	yes

Adjustable parameters
Circuit	NC NO
Other parameters	Off-delay On-delay Hysteresis Emitted light Teach mode Switching point
All other parameters can be found in the product documentation.