Features at a Glance
- For ferrous magnets
ISQ150BK01A3 Inductive Sensor with Selective Performance
Available from stock
Added to Your Cart:
The inductive sensors with selective performance can differ ferrous-magnetic metals (e.g. iron, steel) from non-ferrous-magnetic metals (aluminium, brass, copper and stainless steel).
Inductive Data | |
|---|---|
| Switching Distance | 15 mm |
| Correction Factors Fe360/Stainless Steel V2A/CuZn/Al | 1/0/0/0 |
| Mounting | Flush |
| Mounting A/B/C/D in mm | 0/40/45/0 |
| Switching Hysteresis | < 10 % |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 10 mA |
| Switching Frequency | 500 Hz |
| Temperature Drift | < 10 % |
| Temperature Range | -25 ... 80 °C |
| Switching Output Voltage Drop | < 1.5 V |
| Switching Output/Switching Current | 200 mA |
| Residual Current Switching Output | < 100 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Housing Material | Plastic, ABS |
| Sensing face | Plastic, PBT |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Weight | 121 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 1,840.77 a |
General Data | |
|---|---|
| Stock Type | X |
Output | |
|---|---|
| PNP NC, PNP NO | yes |
Adjustable parameters | |
|---|---|
| Circuit |
NC NC+NO NO |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Mounting |
|---|
|
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Switching Status Indicator
|
Complementary Products |
|---|
|
ECAD data
