FFAP011 Pressure Sensor

UniBar pressure sensors measure the relative pressure in closed systems of any medium in the range -1...600 bar. UniBar pressure sensors are very easy to use thanks to the integrated display. The highly visible switching status display enables the rapid localization of affected sensors for maintenance processes.

This product has been discontinued. Click here to display similar products.

Features at a Glance

Simple operation via the display
Highly visible output indicator

Technical data

Sensor-specific data
Measuring Range	-0.1 ... 0 bar
Measurement Type	relative
Maximum overload pressure	1 bar
Bursting pressure	1.5 bar
Setting Range	4 ... 100 %
Medium	Liquids, gases
Switching Hysteresis	2 %
Measuring error	< ± 0.5 %
Temperature Drift	0.025 %/K

Environmental conditions
Temperature of medium	-25 ... 80 °C
Ambient temperature	-25 ... 80 °C
EMC	DIN EN 61326-2-3
Shock resistance per DIN IEC 68-2-27	30 g / 11 ms
Vibration resistance per DIN IEC 60068-2-6	20 g (10...2000 Hz)

Electrical Data
Supply Voltage	16 ... 32 V DC
Current Consumption (Ub = 24 V)	< 60 mA
Number of Switching Outputs	1
Response Time	30 ms
Switching Output/Switching Current	< 250 mA
Switching Output Voltage Drop	< 2 V
Analog Output	4...20 mA
Signal source	Pressure
Resolution	10 bit
Current Output Load Resistance	< 500 Ohm
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Protection Class	III

Mechanical Data
Setting Method	Menu
Housing Material	Plastic, PBT Plastic, PC
Material Control Panel	Polyester
Material in contact with media	Stainless steel, V4A (1.4404 / 316L) Stainless steel, V4A (1.4435/316L) Rubber, FKM
Degree of Protection	IP65 *
Connection	M12 × 1; 4-pin
Process Connection	G 1/8"
Weight	450 g