Features at a Glance
- Individual parameter configuration via IO-Link 1.1
- Compact, laser-welded stainless steel 316L housing
- Quick sensor replacement thanks to data storage
FX9P002 Pressure Sensor with IO-Link
Available from stock
Added to Your Cart:
weFlux² pressure sensors precisely measure the relative pressure of any desired media. Depending on application requirements, either two switching outputs or one switching output and one analog output can be selected to output measured values. Furthermore, weFlux² pressure sensors offer new dimensions in individual parameter configurability. Sensor parameters, filter and output functions as well as the unit of measurement of the measured values (bar, PSI or Pascal) can be adjusted as needed.
Sensor-specific data | |
|---|---|
| Measuring Range | 0 ... 250 bar |
| Measurement Type | relative |
| Maximum overload pressure | 500 bar |
| Bursting pressure | 750 bar |
| Medium | Liquids, gases |
| Pressure response time (t90) | < 10 ms |
| Measuring error (total) | ± 1 % |
Environmental conditions | |
|---|---|
| Temperature of medium | -25 ... 125 °C** |
| Ambient temperature | -25 ... 80 °C |
| Atmospheric humidity | 100% r.h. |
| Storage temperature | -25 ... 80 °C |
| EMC | DIN EN 61326-2-3 |
| Shock resistance per DIN IEC 68-2-27 | 50 g / 11 ms |
| Vibration resistance per DIN IEC 60068-2-6 | 10 g (10...2000 Hz) |
Electrical Data | |
|---|---|
| Supply Voltage | 12 ... 32 V DC |
| Current Consumption (Ub = 24 V) | < 15 mA |
| Number of Switching Outputs | 2 |
| Switching Output/Switching Current | 100 mA |
| Switching Output Voltage Drop | < 1.5 V |
| Number of analog outputs | 1 |
| Analog Output | 4...20 mA |
| Signal source | Pressure |
| Current Output Load Resistance | < 500 Ohm |
| Voltage output load resistance | > 1 kOhm |
| Interface | IO-Link V1.1 |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | IO-Link |
| Sensor element | Stainless steel membrane |
| Housing Material | Stainless steel, V4A (1.4404/316L) |
| Material in contact with media |
Stainless steel, V4A (1.4404 / 316L) Stainless steel, V4A (1.4548/630) Rubber, FKM |
| Degree of Protection | IP68/IP69K * |
| Connection | M12 × 1; 4-pin |
| Process Connection | G 1/2" |
| Seal material | Fluororubber, FKM |
| Weight | 273 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 1,157.11 a |
Output | |
|---|---|
| Analog Output | yes |
| PNP NO | yes |
| IO-Link | yes |
Adjustable parameters | |
|---|---|
| Analog output |
0...10 V 4...20 mA |
| Output |
Analog Output Push-pull NPN PNP |
| Circuit |
NC NC/NO NO |
| Other parameters | 2 switching points |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
* Not UL certified
** Sensors up to 125 °C medium temperature suitable. During installation, please ensure that the sensor housing is sufficiently cooled by the surroundings.
Connection Diagram |
|---|
|
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
