Features at a Glance
- Condition monitoring
- IO-Link 1.1
- Laser class 1
- Collimated laser light beam
P1NH802 Reflex Sensor with Background Suppression
Available from stock
Added to Your Cart:
The reflex sensor with background suppression works with laser light according to the angle measurement principle and is designed to detect objects against any background. The sensor always has the same switching distance, regardless of the color, shape and surface of the objects. Thanks to the fine laser beam, even small parts can be reliably detected. The IO-Link interface can be used to configure reflex sensors (PNP/NPN, NC/NO) and to output switching statuses.
Optical Data | |
|---|---|
| Range | 400 mm |
| Setting Range | 65 ... 400 mm |
| Switching Hysteresis | < 1 % |
| Light Source | Laser (red) |
| Wavelength | 655 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000 Lux |
| Light Spot Diameter | see Table 1 |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Supply Voltage with IO-Link | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 15 mA |
| Switching Frequency | 600 Hz |
| Switching Frequency (interference-free mode) | 300 Hz |
| Response time (interference-free mode) | 1.7 ms |
| Response Time | 0.83 ms |
| Temperature Drift | < 2 % |
| Temperature Range | -25 ... 60 °C |
| Switching Output Voltage Drop | < 2 V |
| Switching Output/Switching Current | 100 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Single-turn |
| Housing Material | Plastic, ABS/PC |
| Degree of Protection | IP67/IP68 |
| Connection | M12 × 1; 4-pin |
| Optic Cover | Plastic, PMMA |
| Weight | 29 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 2,096.76 a |
Output | |
|---|---|
| PNP NC, PNP NO | yes |
| IO-Link | yes |
Adjustable parameters | |
|---|---|
| Output |
Push-pull NPN PNP |
| Circuit |
NC NO inactive Error output NC+NO |
| Other parameters |
Off-delay On-delay Mode of operation Hysteresis Switching point Emitted light |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Table 1 |
|||
|---|---|---|---|
| Detection Range | 60 mm | 200 mm | 400 mm |
| Light Spot Diameter | 3 mm | 3 mm | 3 mm |
Connection Diagram |
|---|
|
|
Switching Distance Deviation |
|---|
|
Typical characteristic curve based on white, 90 % remission
Sr = Switching Distance
dSr = Switching Distance Change
 black 6 % remission grey 18 % remission |
Ctrl. Panel |
|---|
|
30 = Switching Status/Contamination Warning
05 = Switching Distance Adjuster 68 = supply voltage indicator |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
Screw M4 = 0.5 Nm
|
Complementary Products |
|---|
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
