text.skipToContent text.skipToNavigation

B50M110 Smart Camera

available from stock
The smart camera weQube is based on the wenglor MultiCore technology and combines the function of the scanner and the vision sensors. Therefore, this product allows to capture all established 1D codes and various 2D code types. Region of interest and tracking ensure reliable and stable image recording. The following image processing modules are available: Dimensional accuracy check, sorting procedures, presence control, object counting, position output, pixel counting, optical character recognition, pattern matching, filter options, and statistics evaluation.

Optical Data

Resolution 736 × 480 Pixel
Resolution 0.35 MP
Image Chip color
Image chip size 1/3"
Pixel Size 6 × 6 µm
Light Source External lighting
Optics C mount
Frame Rate 15 fps

Electrical Data

Supply Voltage 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 200 mA
Temperature Range -25 ... 55 °C*
Inputs/Outputs 6
Switching Output Voltage Drop < 2.5 V
Switching Output/Switching Current 100 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Interface RS-232/Ethernet
Protection Class III

Mechanical Data

Setting Method Ethernet
Housing Material Aluminum
Degree of Protection IP67
Connection M12 × 1; 12-pin
Type of Connection Ethernet M12 × 1; 8-pin, X-cod.
Optic Cover Plastic, PMMA, ABS

Safety-relevant Data

MTTFd (EN ISO 13849-1) 263.03 a

General Data

Web server yes
License package weQube - Die Smart Camera


Presence Check yes
Pixel Comparison yes
Reference Image Comparison yes
Tracking yes
OCR yes
Object detection yes
Dimensional accuracy check yes
1D and 2D code reading yes
Pattern matching yes


PNP NO yes
Illumination Output yes
RS-232 Interface yes
Ethernet yes
EtherNet/IP™ yes

Adjustable parameters

Output Push-pull
Circuit NC
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf
Display brightness may decrease with age. This does not result in any impairment of the sensor function. * –25 °C: Ambient conditions should not result in condensation; avoid the formation of ice on the front panel! 55 °C: Continuous illumination at max. 1% or flash mode at 100% brightness with an exposure time of <= 5 ms; may affect the service life of the product.

Connection Diagram

Connection options
for L series illumination
Connection options
for ZVZF series illumination

Ctrl. Panel

20 = Enter key
22 = Up key
23 = Down key
60 = display

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")

Complementary Products

  • Lens
  • Illumination Technology
  • Software
  • Connection cables
Operating instructions
Quick-start guide
General instructions
General instructions
Change_IP_adress_Windows7-10.pdf DNNF020.pdf
Soft- and Firmware
Soft- and Firmware
Example_Omron_EtherNetIP_weQube_1.0.2.zip Example_Rockwell_EtherNetIP_weQube_1.0.2.zip Example_Rockwell_TCP_UDP_uniVision_1.0.0.zip Example_TIA_PROFINET_weQube_1.0.2.zip Example_TIA_TCP_UDP_uniVision_1.0.0.zip Example_TwinCAT3_EtherNETIP_weQube_1.0.2.zip Example_TwinCAT3_PROFINET_weQube_1.0.2.zip Example_TwinCAT3_TCP_UDP_uniVision_1.0.0.zip Firmware_weQube_2.6.1.tgz Software_uniVision_2.6.1.exe
Product description file
Product description file
EDS_B50M110.zip GSDML_B50M110.zip
Interface protocol
Interface protocol
Interface_Protocol_DNNFxxx_LIMA.pdf Interface_Protocol_DNNFxxx_TCP_UDP.pdf Interface_Protocol_weQube_EtherNetIP.pdf Interface_Protocol_weQube_Profinet.pdf
Declarations of Conformity / Approvals
Product certificates
Product certificates

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison