text.skipToContent text.skipToNavigation

MVCM001 Machine Vision Controller uniVision

Available from stock
The machine vision controller is a CPU for evaluating data from image processing products. Quick initial startup is made possible by the pre-installed and powerful easy-to-use image processing software. A large number of interfaces are available for outputting results, allowing up to 16 devices to be connected simultaneously.

Electrical Data

Supply Voltage 9 ... 48 V DC
Current Consumption (Ub = 24 V) < 5 A
Temperature Range 0 ... 45 °C
Number of Switching Outputs 8
Number of Digital Inputs 8
Number of USB 2.0 interfaces 2
Number of USB 3.0 interfaces 6
Number of CAM ports RJ45 4
Number of LAN ports RJ45 2
Number of display port interfaces 2
Number of VGA ports 1
Number of HDMI ports 1
Number of PS/2 ports 1
General protocols Ethernet TCP/IP
UDP

Mechanical Data

Housing Material Aluminum, anodised
Degree of Protection IP40
Wall mounting yes
Weight 5,133 g

General Data

Software uniVision
Processor Intel® Core i7
Clock Frequency 4.4 GHz
RAM 16 GB
Hard disk 128 GB SSD

Operating System

Linux yes

Standards and certificates

B_SYM_CE_01.pdf

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")

Complementary Products

  • 2D/3D Profile Sensors MLSL/MLWL
  • Control unit license upgrade
  • Monitor ZNNG026
  • Software
  • EHSS001 Switch
  • Key Pad Z0044
  • BBVK/BBZK machine vision camera
Operating instructions
Soft- and Firmware
Soft- and Firmware
Examples_HALCON_1.1.0.zip Examples_PLC_uniVision3_1.2.0.zip Examples_Robotics_1.0.0.zip Firmware_MVC_1.0.0.zip Software_wenglor_uniVision_3.3.0.zip

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison