Features at a Glance
- High homogeneity
- No external control required
- High performance: high intensity even in continuous mode
- Easy and flexible installation
LFDR901 Flat Dome Light red light, 900 × 900 mm
Usually ready to ship in 10 days after order is received.
Added to Your Cart:
The LFD series flat dome lights are high-diffuse lights with a camera connection. Due to their intense luminous flux and high homogeneity, they are perfectly suited for large-area applications such as robot-assisted pick-and-place. They can be used in continuous mode or synchronized with the machine vision camera in strobe mode via PNP or NPN inputs. The light is characterized by its narrow edges (4 mm) and easy mounting thanks to the T-slot fastener and the anchor point around the housing. Cameras can be connected easily on the rear of the light.
Optical Data | |
|---|---|
| Light Source | Red Light |
| Wavelength | 630 nm |
| Red light output | 144 W/m² |
Electrical Data | |
|---|---|
| Supply Voltage | 21.6 ... 26.4 V DC |
| Power | 456 W |
| Current Consumption Continuous Mode (Ub = 24 V) | 19 A |
| Rise time | 15 µs |
| Fall time | 10 µs |
| Input signal | PNP/NPN |
| Temperature Range | -10 ... 40 °C |
| Storage temperature | -20 ... 60 °C |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
| Dimming | 0....10 V ≙ 100...30% |
| Overdrive | no |
Mechanical Data | |
|---|---|
| Luminous Field Length (L) | 900 mm |
| Luminous Field Width (W) | 900 mm |
| Luminous Field | 900 × 900 mm |
| Housing Material |
Aluminum, anodised Plastic, ABS/GF |
| Degree of Protection | IP40 |
| Optic Cover | Plastic, PMMA |
| Connection | M12 × 1; 5-pin |
| Max. cable lenght | 10 m |
| Camera aperture inner diameter | 65 mm |
| Weight | 17,000 g |
Function | |
|---|---|
| Operating modes | Continuous, Strobe |
Standards and certificates |
|---|
|
|
Illumination methods |
|---|
|
|
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
68 = supply voltage indicator
9b = Strobe Mode Indicator |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Mounting plate
2 = Illumination zone
|
Complementary Products |
|---|
|
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
