Features at a Glance
- Integrated logic
- Electronic background suppression
- Scaled switching distance adjuster
- Fully encapsulated
OPT144-P06 Reflex Sensor with background suppression electronic
Available from stock
Added to Your Cart:
These sensors have been specially designed for use in accumulation roller conveyors. Their compact design allows for installation between two rollers below the conveyor level. They are thus protected against mechanical damage.
This product has been discontinued, but is still available as a spare part.
Optical Data |
|
|---|---|
| Range | 550 mm |
| Potentiometer min | 220 ... 270 mm |
| Potentiometer center | 320 ... 400 mm |
| Potentiometer max | 550 ... 630 mm |
| Switching Hysteresis | < 15 % |
| Light Source | Infrared, LED |
| Wavelength | 880 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Risk Group (EN 62471) | 1 |
| Max. Ambient Light | 10,000 Lux |
| Opening Angle | 5 ° |
| Principle | Triangulation |
Electrical Data |
|
|---|---|
| Supply Voltage | 18 ... 30 V DC |
| Current Consumption Sensor (Ub = 24 V) | < 30 mA |
| Switching Frequency | 100 Hz |
| Response Time | 5 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -25 ... 60 °C |
| Number of Switching Outputs | 2 |
| Switching Output Voltage Drop | < 0.8 V |
| PNP Switching Output/Switching Current | 200 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Equipment | Logics |
| Block Forwarding | yes |
| Protection Class | III |
Mechanical Data |
|
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Plastic |
| Full Encapsulation | yes |
| Degree of Protection | IP65 |
| Connection Type | socket with cable |
| Connection | M12 × 1; 4-pin |
| Cable length (L) | 1.5 m |
| Weight | 220 g |
General Data |
|
|---|---|
| Scope of delivery | 1 × sensor |
Output |
|
|---|---|
| PNP NC | yes |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Switching Distance Deviation |
|---|
|
Typical characteristic curve based on white, 90 % remission
Pot. = Potentiometer Setting
dSr = Switching Distance Change
 black 6 % remission grey 18 % remission |
Ctrl. Panel |
|---|
|
05 = Switching Distance Adjuster
30 = Switching Status/Contamination Warning |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
|
