Features at a Glance
- Switching point independent of material, color and brightness
- 2 mutually independent switching outputs
- Integrated jump detection
- Intuitive operating concept
- Rugged aluminium housing
P3PC202 Capteur de distance laser à triangulation
Available from stock
Added to Your Cart:
Ces capteurs de distance laser fonctionnent avec un faisceau lumineux rouge fin et une ligne CMOS haute résolution. Ils déterminent la distance entre le capteur et l’objet selon le principe de la triangulation. Grâce à la technologie TripleA intégrée, les capteurs offrent une précision élevée, la stabilité thermique et fonctionnent indépendamment des matériaux. Ils permettent de fournir des résultats précis, même sur des objets de différents matériaux, coloris et formes, ainsi que dans des conditions de luminosité et de température variables. Le concept d’utilisation intuitif simplifie la mise en service et rend les capteurs polyvalents.
Optical Data |
|
|---|---|
| Working Range | 50 ... 350 mm |
| Setting Range | 50 ... 350 mm |
| Reproducibility maximum | 100 µm |
| Reproducibility: 1 Sigma | 10 µm |
| Linearity Deviation | 300 µm |
| Switching Hysteresis | < 0.5 % |
| Light Source | Laser, red |
| Wavelength | 655 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000 Lux |
| Light Spot Diameter | see table 1 |
Electrical Data |
|
|---|---|
| Supply Voltage | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 50 mA |
| Switching Frequency | 650 Hz |
| Response Time | < 0.5 ms |
| Temperature Drift | < 20 µm/K |
| Temperature Range | -30 ... 60 °C |
| Number of Switching Outputs | 2 |
| Switching Output Voltage Drop | < 1.5 V |
| Switching Output/Switching Current | 100 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Interface | IO-Link V1.1 |
| IO-Link Version | 1.1 |
| IO-Link transmission speed | COM3 |
| Protection Class | III |
| FDA Accession Number | 2310674-000 |
Mechanical Data |
|
|---|---|
| Setting Method | Teach-In |
| Housing Material |
Aluminum, anodised Plastic, ABS |
| Degree of Protection | IP67 |
| Connection Type | Plug variant |
| Connection | M12 × 1; 5-pin |
| Optic Cover | Plastic, PMMA |
| Weight | 69 g |
Safety-relevant Data |
|
|---|---|
| MTTFd (EN ISO 13849-1) | 720.35 a |
General Data |
|
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × sensor |
Output |
|
|---|---|
| NPN NO | yes |
| IO-Link | yes |
Adjustable parameters |
|
|---|---|
| Output |
Error Output Push-pull NPN PNP |
| Circuit |
NC NC/NO NO |
| Other parameters |
Exposure time Laser light Switching hysteresis Teach-in mode Off-delay On-delay |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Table 1 |
|||
|---|---|---|---|
| Detection Range | 50 mm | 200 mm | 350 mm |
| Light Spot Diameter | 1,5 mm | 1 mm | 1 mm |
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
06 = Teach Button
5a = Switching Status Indicator, O1 68 = Power LED 6a = Switching Status Indicator, O2 |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
Screw M4 = 1 Nm
M5 screw = 2 Nm |
Complementary Products |
|---|
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
