Features at a Glance
- Integrated logic
- Fully encapsulated
- Energy-saving trough automatic roll cutoff
OPT339-P06 Logic Unit for Roller Conveyor Systems
Available from stock
Added to Your Cart:
These sensors have been specially designed for use in accumulation roller conveyors. Their compact design allows for installation between two rollers below the conveyor level. They are thus protected against mechanical damage.
This product has been discontinued, but is still available as a spare part.
Electrical Data |
|
|---|---|
| Supply Voltage | 18 ... 30 V DC |
| Current Consumption Sensor (Ub = 24 V) | < 10 mA |
| Off-Delay | 0 ... 2 s |
| Temperature Range | -25 ... 60 °C |
| Number of Switching Outputs | 3 |
| Switching Output Voltage Drop | < 0.8 V |
| PNP Switching Output/Switching Current | 200 mA |
| Valve or Motor Output/Switching Current | 200 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Equipment | Logics |
| Single Discharge | yes |
| Output Magnetic Valve/Engine | yes |
| Automatic Roller Shutdown | yes |
| Protection Class | III |
Mechanical Data |
|
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Plastic |
| Full Encapsulation | yes |
| Degree of Protection | IP65 |
| Connection Type | plug with cable |
| Connection | M12 × 1; 4-pin |
| Cable length (L) | 1.5 m |
| Weight | 243 g |
General Data |
|
|---|---|
| Scope of delivery | 1 × logic unit |
Output |
|
|---|---|
| PNP NC | yes |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Time Delay
|
