text.skipToContent text.skipToNavigation

C50C003 1D/2D Code Scanner

Usually ready to ship in 1–3 days.
The scanner weQubeDecode is based on the wenglor MultiCore technology. Omnidirectional scanning enables decoding of printed, needle-punched, laser-engraved or etched codes on various materials in any orientation. Good scanning results are even obtained with poor code quality. In addition to the established 1D codes it is also suitable for scanning various 2D codes. A list of readable code types is found in the operating instructions.

Optical Data

Working Range  ≥ 20 mm
Resolution 736 × 480 Pixel
Resolution 0.35 MP
Image Chip monochrome
Image chip size 1/3"
Pixel Size 6 × 6 µm
Light Source Red Light
Optics Auto-focus
Visual Field see Table 1
min. Resolution 0.1 mm
Barcode Printing Contrast > 15 %

Environmental conditions

Temperature Range -25 ... 55 °C*
Atmospheric humidity 5...95%, non-condensing

Electrical Data

Supply Voltage 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 200 mA
Scan Rate 20 scans/sec
Inputs/Outputs 6
Switching Output Voltage Drop < 2.5 V
Switching Output/Switching Current 100 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Interface RS-232/Ethernet
Protection Class III

Mechanical Data

Housing Material Aluminum, anodised
Degree of Protection IP67
Connection M12 × 1; 12-pin
Type of Connection Ethernet M12 × 1; 8-pin, X-cod.
Optic Cover Plastic, PMMA
Weight 301 g

Safety-relevant Data

MTTFd (EN ISO 13849-1) 227.7 a

General Data

Web server yes
License package weQubeDecode

Function

1D and 2D code reading yes

Output

PNP NO yes
Illumination Output yes
RS-232 Interface yes
Ethernet yes

Adjustable parameters

Output Push-pull
NPN
PNP
Circuit NC
NC/NO
NO

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf
Display brightness may decrease with age. This does not result in any impairment of the sensor function. * –25 °C: Ambient conditions should not result in condensation; avoid the formation of ice on the front panel! 55 °C: Continuous illumination at max. 1% or flash mode at 100% brightness with an exposure time of <= 5 ms; may affect the service life of the product.

Table 1

Working Distance 20 mm 100 mm 200 mm
Visual Field 9 × 6 mm 65 × 42 mm 134 × 87 mm

Connection Diagram

Scanning Field Table

AK = Outer Edge
IK = Inner Edge
LA = Read Range
SB = Scan Width
TSA = Depth of Focus Outer Edge
TSI = Depth of Focus Inner Edge
Connection options
for L series illumination
Connection options
for ZVZF series illumination

Ctrl. Panel

20 = Enter key
22 = Up key
23 = Down key
60 = display

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")

Complementary Products

  • Disk with Polarization Filter ZNNG004
  • Protective Housing ZNNS001, ZNNS002
  • Illumination Technology
  • weQubeOCR License Upgrade DNNL003
  • weQubeVision License Upgrade DNNL001
  • Software
  • ZC4G002 connection cable
  • ZC4G003 connection cable
  • ZDCG004 connection cable
Operating instructions
Quick-start guide
General instructions
General instructions
Change_IP_adress_Windows7-10.pdf DNNF020.pdf
Soft- and Firmware
Soft- and Firmware
Example_Rockwell_TCP_UDP_uniVision_1.0.0.zip Example_TIA_TCP_UDP_uniVision_1.0.0.zip Example_TwinCAT3_TCP_UDP_uniVision_1.0.0.zip Firmware_weQube_2.6.1.tgz Software_uniVision_2.6.1.exe
Interface protocol
Interface protocol
Interface_Protocol_DNNFxxx_LIMA.pdf Interface_Protocol_DNNFxxx_TCP_UDP.pdf
Declarations of Conformity / Approvals

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison