Features at a Glance
- Connection of up to 4 through-beam sensors
- Potential-free safety relay outputs
- Monitoring of external safety relays
SS2-00VA000R2 Safety Analysis Module for Safety Through-Beam Sensor
Available from stock
Added to Your Cart:
The individual safety light barrier control unit is used to monitor up to 4 through-beam sensors. Interruption of any single beam results in deactivation of the safety output.
Electrical Data | |
|---|---|
| Supply Voltage | 24 V DC |
| Current Consumption (Ub = 24 V) | < 260 mA |
| Response Time | < 30 ms |
| Temperature Range | 0 ... 55 °C |
| Safety Output | Relay |
| Number of safety outputs (OSSDs) | 2 |
| Switching Output Voltage Drop | < 3 V |
| PNP Switching Output/Switching Current | < 100 mA |
| Relay Output/Switching Current (250 VAC) | 2 A |
| Reverse Polarity Protection | yes |
| Protection Class | II |
Mechanical Data | |
|---|---|
| Housing Material | Plastic, PA |
| Degree of Protection | IP20 |
| Connection | Screw Clamp |
| Weight | 186 g |
Safety-relevant Data | |
|---|---|
| Safety Category (EN ISO 13849-1) | 2 |
| Performance Level (EN ISO 13849-1) | PL c |
| PFHD | 3,16 × E-7 1/h * |
| Safety Integrity Level (EN 62061) | SILCL1 |
Function | |
|---|---|
| Restart Inhibit | yes |
| Contactor Monitoring | yes |
Standards and certificates |
|---|
|
|
* PFHD for control incl. 4 SL2
Connection Table |
|---|
|
|
Safety Key Figure T10d |
|---|
|
|
Ctrl. Panel |
|---|
|
71 = Channel 1
72 = Channel 2/Error Indicator 73 = OSSD/Diagnosis |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
|
Complementary Products |
|---|
|
ECAD data
