Features at a Glance
- Auto-button function
- Integrated LED illumination
- Integrated code reconstruction
- Web link
- PROFINET and EtherNet/IP™
C5PC006 1D/2D Code Scanner
Available from stock
Added to Your Cart:
These 2D code scanners are suitable for omnidirectional scanning of 1D and 2D codes.
The following code types can be processed:
1D codes: Code39, Code93, Code128, UPC/EAN, BC412, Interleaved 2 of 5, Codabar, Postal Codes, Pharmacode
2D codes: DataMatrix ECC 0...200, PDF417, Micro PDF417, QR-Code, Micro QR-Code, Aztec Code, GS1 Databar, Dot code
Additional code types upon request.
Optical Data | |
|---|---|
| Barcode Density | Standard density |
| Resolution | 2,592 × 1,944 Pixel |
| Light Source | White Light |
| Service Life (T = +25 °C) | 50,000 h |
| min. Resolution | 0.08 mm |
Environmental conditions | |
|---|---|
| Temperature Range | 0 ... 45 °C |
| Atmospheric humidity | 5...95%, non-condensing |
Electrical Data | |
|---|---|
| Supply Voltage | 5 ... 30 V DC |
| Current Consumption (Ub = 24 V) | 150 mA |
| Scan Rate | 5 scans/sec |
| Switching Output | Optoisolator |
| Number of Switching Outputs | 3 |
| Switching Output/Switching Current | 100 mA |
| Reverse Polarity Protection | yes |
| Interface | RS-232/Ethernet |
| Trigger Input | Optoisolator |
| Signal Input | Optoisolator |
| Number of Signal Inputs | 3 |
Mechanical Data | |
|---|---|
| Setting Method | Ethernet |
| Housing Material | Metal |
| Degree of Protection | IP65 |
| Connection | M12 × 1; 12-pin |
| Type of Connection Ethernet | M12 × 1; 8-pin |
| Weight | 68 g |
Output | |
|---|---|
| PNP NO/NC switchable | yes |
| NPN NO/NC switchable | yes |
| Ethernet | yes |
| PROFINET-I/O, CC-B | yes |
| EtherNet/IP™ | yes |
Standards and certificates |
|---|
|
|
Connection Table |
|---|
|
|
| Connection options |
|---|
|
for L series illumination
|
| Connection options |
|---|
|
for ZVZF series illumination
|
Ctrl. Panel |
|---|
|
06 = Teach Button
48 = Network Status 03 = Error Indicator 36 = Mode Indicator 50 = Good Read 68 = supply voltage indicator 70 = Run/Trigger |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
|
Complementary Products |
|---|
|
General instructions
ECAD data
Soft- and Firmware
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
