Features at a Glance
- Power to lock principle
- Performance Level: Cat. 4 PL e
- Continuously monitored locking force of 1150 N
S2FP006 Guard Locking Device Electromechanic, Power to Lock Principle
Disponible en stock
Ajouté à votre panier :
The electromechanical guard locking device is distinguished by a high, continuously monitored locking force of 1150 N. This means that only one guard locking device is required to attain the Cat. 4 PL e safety level (EN ISO 13849-1). The safety level, as well as reaction time and risk time, remain unchanged when connected in series. Extensive diagnosis functions enhance system availability and simplify installation and maintenance. The unique star handle operating concept is especially well-suited for rotary and sliding doors. Thanks to RFID encoding and an actuator with teach-in function, the guard locking device demonstrates high levels of protection against manipulation.
Electrical Data |
|
|---|---|
| Sensor Type | Locking unit |
| Response Time | ≤ 100 ms |
| Risk time | ≤ 200 ms |
| Temperature Range | 0 ... 60 °C |
| Storage temperature | -10 ... 90 °C |
| Safety Output | OSSD |
| Number of safety outputs (OSSDs) | 2 |
| PNP Safety Output/Switching Current | 250 mA |
| Number of Signal Outputs | 1 |
| PNP signal output switching current | 50 mA |
| Short Circuit Protection | yes |
| Protection Class | III |
Mechanical Data |
|
|---|---|
| Housing Material | Plastic |
| Degree of Protection |
IP67 IP66 IP69 |
| Connection Type | Plug variant |
| Connection | M12 × 1; 8-pin |
| Latching Force, typical | 25 / 50 N |
| Poids | 730 g |
Safety-relevant Data |
|
|---|---|
| Operating principle | RFID |
| Coding | Individual, teachable |
| Safety Category (EN ISO 13849-1) | 4 |
| Performance Level (EN ISO 13849-1) | PL e |
| PFHD | 5,20 × E-10 1/h |
| Safety Integrity Level (EN 61508) | SIL 3 |
| PDDB (EN 60947-5-3) | yes |
| Locking force F (Zh) | 1,150 N |
| Principle | Power to lock principle |
Function |
|
|---|---|
| Series Connection | yes |
| Monitored lock | yes |
| Mechanical Detent Mechanism | yes |
| Detent Mechanism | yes |
| Auxiliary release | yes |
Standards and certificates |
|---|
|
|
Safety data for locking function
Connection Diagram |
|---|
|
|
Dimensioned Picture |
|---|
|
Dimensions en mm (1 mm = 0,03937 pouce)
|
Complementary Products |
|---|
|
Données ECAD
Produits en point de mire
Cette section offre une vue d’ensemble plus détaillée de l’univers de ce produit. Toutes les informations sur les nouvelles gammes de produits ainsi que les tutoriels, modèles, et bien plus encore, sont réunis ici de manière claire et compréhensible. Vous trouverez ici toutes les informations en un clin d’œil.
