Features at a Glance
- Flexible soft binder on the sensor
- Correction factor 1
- Plug and Play
- Separable housing
- Intuitive operating concept with IO-Link interface
IR2D001 接近开关 环形传感器
Available from stock
Added to Your Cart:
带有可拆式外壳的电感式环形传感器可以快速灵活地装到软管等各种物体上。结构紧凑，配有四周可视的切换状态指示灯和朝向软管的电缆出口，特别适合狭窄的空间，通过电位计或 IO-Link 接口操作简便。得益于修正系数 1，传感器切换可不受材料影响。频率切换功能可确保多个传感器在附近运行时不会相互影响。
Inductive Data |
|
|---|---|
| Inside diameter | 10.2 mm |
| Max. tube diameter | 10 mm |
| Installation A/Bx/By/C in mm | 0/15/35/5 |
| Installation A/Bx/By/C in mm with frequency switching | 0/0/0/5 |
| Principle | Dynamic |
| Smallest recognizable object (Ø) | 2 mm* |
| Correction Factors Stainless Steel V2A/CuZn/Al | 1/1/1 |
Electrical Data |
|
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 20 mA |
| Object speed | 0.1 ... 50 m/s |
| Response Time | < 300 µs |
| Ready-state delay | < 1.5 s |
| Switching Output Voltage Drop | 1.5 V |
| Temperature Range | 0 ... 60 °C |
| Short Circuit Protection | yes |
| Overload Protection | yes |
| Reverse Polarity Protection | yes |
| Switching Output/Switching Current | 100 mA |
| Pulse extension | 200 ms |
| Interface | IO-Link V1.1 |
| IO-Link Version | 1.1 |
Mechanical Data |
|
|---|---|
| Connection Type | Plug variant |
| Connection | M8 × 1; 4-pin |
| Setting Method | Potentiometer/IO-Link |
| Housing Material | Plastic, PA |
| Hanger opening/closing cycles | Max. 100 |
| Degree of Protection | IP54 |
| Weight | 26 g |
Safety-relevant Data |
|
|---|---|
| MTTFd (EN ISO 13849-1) | 1,018.99 a |
General Data |
|
|---|---|
| Scope of delivery | 1 × ZR0E001 soft binder |
| Packaging unit | 1 Piece |
Output |
|
|---|---|
| PNP NO | yes |
Adjustable parameters |
|
|---|---|
| Output |
PNP Push-pull NPN |
| Circuit |
NO NC NC/NO |
| Pulse extension | 5 ... 200 ms |
| Other parameters |
Sensitivity Error indicator Frequency switching |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
* Relates to a steel ball when the setting potentiometer max. is selected
Connection Diagram |
|---|
|
|
Mounting |
|---|
|
|
Ctrl. Panel |
|---|
|
0b = Pulse length adjuster
17 = Sensitivity Adjustment 1c = Status display/setup aid 3a = Switching Status Indicator/Error Indicator 68 = Power LED |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
M4 screw = 2.9 Nm
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
