text.skipToContent text.skipToNavigation

FX5P014 Pressure Sensor with IO-Link

Genellikle siparişin alınmasından itibaren 15 gün içinde sevkiyata hazır.
weFlux² pressure sensors precisely measure the relative pressure of any desired media. Depending on application requirements, either two switching outputs or one switching output and one analog output can be selected to output measured values. Furthermore, weFlux² pressure sensors offer new dimensions in individual parameter configurability. Sensor parameters, filter and output functions as well as the unit of measurement of the measured values (bar, PSI or Pascal) can be adjusted as needed.
Bu ürünün üretimi durdurulmuştur ancak yedek parça olarak kullanılmaya devam edecektir.

Sensor-specific data

Sensor element Ceramic membrane
Measuring Range -1 ... 10 bar
Measurement Type relative
Maximum overload pressure 20 bar
Bursting pressure 30 bar
Medium Liquids, gases
Pressure response time (t90) < 10 ms
Resolution  > 11 bit
Hysteresis  < ± 0.1 %
Linearity Deviation  < ± 0.5 %
Zero-point error < ± 0.1 %
Repeat Accuracy < ± 0.1 %
Temperature coefficient zero-point <± 0,15% /10K
Temperature coefficient range <± 0,2% /10K
Measuring error ≤ ± 0.5 %

Environmental conditions

Temperature of medium -40 ... 125 °C**
Ambient temperature -20 ... 80 °C
Storage temperature -20 ... 80 °C
EMC DIN EN 61326-2-3
Shock resistance per DIN IEC 68-2-27 50 g / 11 ms
Vibration resistance per DIN IEC 60068-2-6 10 g (10...2000 Hz)

Electrical Data

Supply Voltage 12 ... 32 V DC
Current Consumption (Ub = 24 V) < 15 mA
Number of Switching Outputs 2
Switching Output/Switching Current 100 mA
Switching Output Voltage Drop < 1.5 V
Number of analog outputs 1
Analog Output 4...20 mA
Signal source Pressure
Current Output Load Resistance < 500 Ohm
Voltage output load resistance > 1 kOhm
Interface IO-Link V1.1
Short Circuit Protection yes
Reverse Polarity Protection yes
Protection Class III

Mechanical Data

Setting Method IO-Link
Housing Material Stainless steel, V4A (1.4404/316L)
Material in contact with media Stainless steel, V4A (1.4404/316L)
Rubber, EPDM
Ceramic
Degree of Protection IP65 *
Connection Type Plug variant
Connection M12 × 1; 4-pin
Process Connection 7/16-20 UNF
Thread External thread
Seal material Rubber, EPDM
Ağırlık 264 g

Safety-relevant Data

MTTFd (EN ISO 13849-1) 1,157.11 a

General Data

Scope of delivery 1 × initial start-up instructions
1 × sensor

Output

Analog Output yes
PNP NO yes
IO-Link yes

Adjustable parameters

Analog output 0...10 V
4...20 mA
Output Analog Output
Push-pull
NPN
PNP
Circuit NC
NC/NO
NO
Other parameters 2 switching points
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf
* Not UL certified
** Sensors up to 125 °C medium temperature suitable. During installation, please ensure that the sensor housing is sufficiently cooled by the surroundings.

Connection Diagram

Dimensioned Picture

Ölçü bilgileri mm cinsindendir (1 mm = 0,03937 inç)

Complementary Products

  • IO-Link converter
İşletim kılavuzu
Quick-start guide
Ürün açıklama dosyası
Ürün açıklama dosyası
IODD_FX5P_V1.1.zip
Arayüz protokolü
Arayüz protokolü
Interface_Protocol_IO-Link_Parameter_Process_Data_FXxPxxx.pdf
Uygunluk beyanları / Onaylar
Ürün sertifikaları
Ürün sertifikaları
FXxP0_FXxQ0_IO-Link_V1.1_Manufacturer_declaration.pdf

Öne Çıkan Ürün Özellikleri

Bu alan, bu ürünün dünyasına daha derin bir bakış sağlar. Yeni ürün serileri, kılavuzlar, şablonlar ve daha fazlası ile ilgili tüm bilgiler burada bir araya getirilmiş ve düzenli bir şekilde hazırlanmıştır – kolay bulunabilir, kolay anlaşılır ve mantıklı. Bir bakışta her şey.
Ürün karşılaştırması