Features at a Glance
- Individual parameter configuration via IO-Link 1.1
- Compact, laser-welded stainless steel 316L housing
- Quick sensor replacement thanks to data storage
- Precise measuring accuracy: ±0.5%
FX5P003 Pressure Sensor with IO-Link
Disponibile a magazzino
Aggiunto al carrello:
weFlux² pressure sensors precisely measure the relative pressure of any desired media. Depending on application requirements, either two switching outputs or one switching output and one analog output can be selected to output measured values. Furthermore, weFlux² pressure sensors offer new dimensions in individual parameter configurability. Sensor parameters, filter and output functions as well as the unit of measurement of the measured values (bar, PSI or Pascal) can be adjusted as needed.
Sensor-specific data |
|
|---|---|
| Sensor element | Ceramic membrane |
| Measuring Range | -1 ... 10 bar |
| Measurement Type | relative |
| Maximum overload pressure | 20 bar |
| Bursting pressure | 30 bar |
| Medium | Liquids, gases |
| Pressure response time (t90) | < 10 ms |
| Resolution | > 11 bit |
| Hysteresis | < ± 0.1 % |
| Linearity Deviation | < ± 0.5 % |
| Zero-point error | < ± 0.1 % |
| Repeat Accuracy | < ± 0.1 % |
| Temperature coefficient zero-point | <± 0,15% /10K |
| Temperature coefficient range | <± 0,2% /10K |
| Measuring error | ≤ ± 0.5 % |
Environmental conditions |
|
|---|---|
| Temperature of medium | -10 ... 125 °C** |
| Ambient temperature | -10 ... 80 °C |
| Storage temperature | -10 ... 80 °C |
| EMC | DIN EN 61326-2-3 |
| Shock resistance per DIN IEC 68-2-27 | 50 g / 11 ms |
| Vibration resistance per DIN IEC 60068-2-6 | 10 g (10...2000 Hz) |
Electrical Data |
|
|---|---|
| Supply Voltage | 12 ... 32 V DC |
| Current Consumption (Ub = 24 V) | < 15 mA |
| Number of Switching Outputs | 2 |
| Switching Output/Switching Current | 100 mA |
| Switching Output Voltage Drop | < 1.5 V |
| Number of analog outputs | 1 |
| Analog Output | 4...20 mA |
| Signal source | Pressure |
| Current Output Load Resistance | < 500 Ohm |
| Voltage output load resistance | > 1 kOhm |
| Interface | IO-Link V1.1 |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Protection Class | III |
Mechanical Data |
|
|---|---|
| Setting Method | IO-Link |
| Housing Material | Stainless steel, V4A (1.4404/316L) |
| Material in contact with media |
Stainless steel, V4A (1.4404/316L) Rubber, FKM Ceramic |
| Degree of Protection | IP65 * |
| Connection Type | Plug variant |
| Connection | M12 × 1; 4-pin |
| Process Connection | G 1/4" |
| Thread | External thread |
| Seal material | Fluororubber, FKM |
| Peso | 250 g |
Safety-relevant Data |
|
|---|---|
| MTTFd (EN ISO 13849-1) | 1,157.11 a |
General Data |
|
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × sensor |
Output |
|
|---|---|
| Analog Output | yes |
| PNP NO | yes |
| IO-Link | yes |
Adjustable parameters |
|
|---|---|
| Analog output |
0...10 V 4...20 mA |
| Output |
Analog Output Push-pull NPN PNP |
| Circuit |
NC NC/NO NO |
| Other parameters | 2 switching points |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
* Not UL certified
** Sensors up to 125 °C medium temperature suitable. During installation, please ensure that the sensor housing is sufficiently cooled by the surroundings.
** Sensors up to 125 °C medium temperature suitable. During installation, please ensure that the sensor housing is sufficiently cooled by the surroundings.
Connection Diagram |
|---|
|
|
Dimensioned Picture |
|---|
|
Misure in mm (1 mm = 0,03937 pollici)
|
Complementary Products |
|---|
|
Datos ECAD
Highlights dei prodotti
Quest’area offre una panoramica più approfondita del mondo di questo prodotto. Tutte le informazioni sulle nuove serie di prodotti, così come i tutorial, i modelli e molto altro ancora sono combinati e presentati chiaramente qui – tangibili, intuibili e comprensibili. Tutto a colpo d’occhio.
