Features at a Glance
- Compact, laser-welded stainless steel 316L housing
- Analog output: 4…20 mA
- Very fast response time of < 1 s
- Very low weight at 13 g (without cable)
- Very small format at Ø 14 mm, SW13
FM4P201 Pressure Sensor
Ab Lager verfügbar
Ihrem Warenkorb hinzugefügt:
The weFlux²micro miniature pressure sensor with analog output is distinguished by its space-saving design and low weight. This enables precise pressure measurements in confined installation spaces and on moving plant components such as robot arms. The short response time (<1 ms) allows the sensor to be implemented in quick pressure measurement applications – for example, when monitoring pressure curves in hydraulic systems.
Sensor-specific data |
|
|---|---|
| Measuring Range | -1 ... 5 bar |
| Measurement Type | relative |
| Maximum overload pressure | 10 bar |
| Bursting pressure | 15 bar |
| Medium | Liquids;** gases |
| Pressure response time (t90) | < 1 ms |
| Hysteresis | < ± 0.7 % |
| Linearity Deviation | < ± 0.7 % |
| Zero-point error | < ± 0.8 % |
| Repeat Accuracy | < ± 0.2 % |
| Temperature coefficient zero-point | <± 0,2% /10K |
| Temperature coefficient range | <± 0,15% /10K |
| Measuring error | ≤ ± 1.6 % |
Environmental conditions |
|
|---|---|
| Temperature of medium | -25 ... 125 °C* |
| Ambient temperature | -25 ... 80 °C |
| Storage temperature | -25 ... 80 °C |
| EMC | DIN EN 61326-2-3 |
| Shock resistance per DIN IEC 68-2-27 | 30 g / 11 ms |
| Vibration resistance per DIN IEC 60068-2-6 | 20 g (10...2000 Hz) |
Electrical Data |
|
|---|---|
| Supply Voltage | 12 ... 28 V DC |
| Current Consumption (Ub = 24 V) | ≤ 30 mA |
| Number of analog outputs | 1 |
| Analog Output | 4...20 mA |
| Current Output Load Resistance | < 500 Ohm |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | no |
| Protection Class | III |
Mechanical Data |
|
|---|---|
| Housing Material | Stainless steel, V4A (1.4404/316L) |
| Material in contact with media |
Stainless steel, V4A (1.4404/316L) Stainless steel, V4A (1.4548/630) Rubber, FKM |
| Degree of Protection |
IP67 IP68 |
| Cable length (L) | 2 m |
| Connection Type | Cable variants |
| Connection | Cable; 2-wire |
| Cable Jacket Material | PVC |
| Process Connection | M5 x 0.8 |
| Thread | External thread |
| Seal material | Fluororubber, FKM |
| Bending radius (used in motion) | 5 × d |
| Bending radius (fixed installation) | ≥ 3 × d |
| Drag Chain Suitable | yes |
| Gewicht | 77 g |
Safety-relevant Data |
|
|---|---|
| MTTFd (EN ISO 13849-1) | 3,842.62 a |
General Data |
|
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × sensor |
Output |
|
|---|---|
| Analog Output | yes |
Standards and certificates |
|---|
|
|
* Sensors suitable up to temperature of medium of 125 °C. During installation, please ensure that the sensor housing is sufficiently cooled by the surroundings.
** The sensor is not suitable for highly viscous liquids and mixtures containing particles
** The sensor is not suitable for highly viscous liquids and mixtures containing particles
Connection Diagram |
|---|
|
|
Dimensioned Picture |
|---|
|
Maßangaben in mm (1 mm = 0,03937 Inch)
Tightening torque = 1 Nm
|
ECAD-Daten
Produkthighlights
Dieser Bereich bietet einen tieferen Einblick in die Welt dieses Produktes. Alle Informationen rund um neue Produktserien sowie Tutorials, Templates und vieles mehr werden hier vereint und übersichtlich aufbereitet – greifbar, verständlich und nachvollziehbar. Alles auf einen Blick.