Features at a Glance
- Condition monitoring
- High switching frequency
- IO-Link 1.1
- Detect extremely small parts starting at 1 mm
P1KL027 Retro-Reflex Sensor Universal
Ab Lager verfügbar
Ihrem Warenkorb hinzugefügt:
The retro-reflex sensor works with a fine laser beam and a reflector. The collimated laser beam of laser class 1 detects objects, for instance, when conducting installation, feed or presence controls, starting at a size of one millimeter over the entire range. The IO-Link interface can be used to configure retro-reflective barriers (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.
Optical Data |
|
|---|---|
| Range | 12,000 mm |
| Reference Reflector/Reflector Foil | RE6151BM |
| Smallest Recognizable Part | see table 2 |
| Switching Hysteresis | < 15 % |
| Light Source | Laser, red |
| Light spot geometry | Collimated |
| Wavelength | 680 nm |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000 Lux |
| Light Spot Diameter | see table 1 |
| Optics | Two-Lens Optic |
| Optical axis | Aligned |
| Switching point | Calibrated |
Electrical Data |
|
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Supply Voltage with IO-Link | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 15 mA |
| Switching Frequency | 2,000 Hz |
| Switching frequency (speed mode) | 4,000 Hz |
| Response Time | 0.25 ms |
| Response time (speed mode) | 0.125 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -40 ... 50 °C |
| Switching Output Voltage Drop | < 2 V |
| Switching Output/Switching Current | 100 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
| FDA Accession Number | 1710976-001 |
Mechanical Data |
|
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Plastic, ABS/PC |
| Degree of Protection |
IP67 IP68 |
| Connection Type | plug with cable |
| Connection | M12 × 1; 4-pin |
| Cable length (L) | 200 mm |
| Cable Jacket Material | Plastic, PUR |
| Optic Cover | Plastic, PMMA |
| Gewicht | 20 g |
Safety-relevant Data |
|
|---|---|
| MTTFd (EN ISO 13849-1) | 2,617.62 a |
General Data |
|
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × sensor |
Output |
|
|---|---|
| IO-Link | yes |
| PNP NC, PNP NO | yes |
Adjustable parameters |
|
|---|---|
| Output |
Push-pull NPN PNP |
| Circuit |
NC NO inactive Error output NC+NO |
| Other parameters |
Off-delay On-delay Mode of operation Hysteresis Emitted light Switching point |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Table 1 |
|||
|---|---|---|---|
| Working Distance | 0,1 m | 5 m | 12 m |
| Light Spot Diameter | 4 mm | 11 mm | 22 mm |
| Table 2 | |||
|---|---|---|---|
| Distance, Sensor to Reflector | 2 m | 4 m | 12 m |
| Smallest Recognizable Part | 1,5 mm | 1 mm | 2,5 mm |
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
05 = Switching Distance Adjuster
30 = Switching Status/Contamination Warning 68 = Power LED |
Dimensioned Picture |
|---|
|
Maßangaben in mm (1 mm = 0,03937 Inch)
1 = Transmitter Diode
2 = Receiver Diode
Screw M3 = 0,5 Nm
|
Reflector data |
|
|---|---|
| RQ100BA | 0.1 ... 16 m |
| RE18040BA | 0.1 ... 12 m |
| RQ84BA | 0.1 ... 16 m |
| RR84BA | 0.1 ... 16 m |
| RE9538BA | 0.1 ... 4.5 m |
| RE6151BM | 0.1 ... 12 m |
| RR50_A | 0.1 ... 16 m |
| RE6040BA | 0.1 ... 15 m |
| RE8222BA | 0.1 ... 10 m |
| RR34_M | 0.1 ... 2.5 m |
| RE3220BM | 0.1 ... 7 m |
| RE6210BM | 0.1 ... 4.5 m |
| RR25_M | 0.1 ... 7 m |
| RR25KP | 0.1 ... 2.5 m |
| RR21_M | 0.1 ... 4 m |
| Z90R004 | 0.15 ... 5 m |
| Z90R005 | 0.15 ... 5.9 m |
| ZRAE02B01 | 0.1 ... 7 m |
| ZRME01B01 | 0.1 ... 3 m |
| ZRME03B01 | 0.1 ... 4.5 m |
| ZRMR02K01 | 0.1 ... 3 m |
| ZRMS02_01 | 0.1 ... 4 m |
| RF505 | 0.1 ... 2 m |
| RF508 | 0.1 ... 2 m |
| RF258 | 0.1 ... 2 m |
| ZRDF03K01 | 0.1 ... 4 m |
| ZRDF10K01 | 0.1 ... 4 m |
Complementary Products |
|---|
|
ECAD data
Produkthighlights
Dieser Bereich bietet einen tieferen Einblick in die Welt dieses Produktes. Alle Informationen rund um neue Produktserien sowie Tutorials, Templates und vieles mehr werden hier vereint und übersichtlich aufbereitet – greifbar, verständlich und nachvollziehbar. Alles auf einen Blick.
