text.skipToContent text.skipToNavigation

P1KY106 Laser Distance Sensor Time of Flight

Available from stock
The high-performance distance sensor with compact format accurately determines distance between the sensor and the object on the basis of transit time measurement. Two mutually independent switching outputs and the intelligent IO-Link interface permit multifunctional use for precisely ascertaining distance to an object, or for detecting the object at any two switching points. A large working range of 0 to 1,500 mm ensures top performance with a miniature format and flexibility where range is concerned. Thanks to laser class 1, the sensor’s laser beam is harmless for the human eye.

Optical Data

Working Range 0 ... 1,500 mm
Setting Range 50 ... 1,500 mm
Switching Hysteresis  < 30 mm
Light Source Laser (infrared)
Wavelength 940 nm
Service Life (T = +25 °C) 100,000 h
Laser Class (EN 60825-1) 1
Max. Ambient Light 10,000 Lux
Light Spot Diameter see Table 1
Reflector required no

Electrical Data

Supply Voltage 10 ... 30 V DC
Supply Voltage with IO-Link 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 15 mA
Switching Frequency 10 Hz
Response Time  < 36 ms
Temperature Drift < 2.5 %
Temperature Range -40 ... 60 °C
Number of Switching Outputs 2
Switching Output Voltage Drop < 2.5 V
Switching Output/Switching Current 100 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Lockable yes
Interface IO-Link V1.1
Protection Class III

Mechanical Data

Setting Method Teach-In
Housing Material Plastic, ABS/PC
Plastic, PC
Cable Jacket Material Plastic, PUR
Optic Cover Plastic, PMMA
Degree of Protection IP67/IP68
Connection M12 × 1; 4-pin
Cable Length 200 mm
Weight 18 g

Safety-relevant Data

MTTFd (EN ISO 13849-1) 2,266.52 a

Output

PNP NC yes
IO-Link yes

Adjustable parameters

Circuit NC
NO
Other parameters Off-delay
On-delay
Hysteresis
Emitted light
Teach mode
Switching point
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf
* Temperature range with permanently installed cable, bending radius: > 20 mm

Table 1

Working Distance 350 mm 700 mm 1500 mm
Light Spot Diameter 14 mm 25 mm 42 mm

Connection Diagram

- = supply voltage 0 V
+ = supply voltage +
E/A1 = programmable input/output / IO-Link
E/A2 = programmable input/output

Switching Distance Deviation

Typical characteristic curve based on white, 90 % remission
Sr = Switching Distance
dSr = Switching Distance Change
black 6 % remission
grey 18 % remission

Ctrl. Panel

68 = supply voltage indicator
06 = Teach Button
5a = Switching Status Indicator, A1
6a = Switching Status Indicator, A2

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Receiver Diode 2 = Transmitter Diode Screw M3 = 0,5 Nm

Complementary Products

  • IO-Link Master
  • Software
Initial start-up instructions
Operating instructions
Product description file
Product description file
IODD_P1KY106_V1.1.zip
Interface protocol
Interface protocol
Interface_Protocol_IO-Link_Parameter_Process_Data_P1KY10x.pdf
Declarations of Conformity / Approvals
Product certificates
Product certificates
P1KY10x_IO-Link_V1.1_Manufacturer_declaration.pdf

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison