Intelligent Networking, Maximized Freedom.

In addition to outstanding features with regard to optics, performance and operation, wenglor’s 2D/3D Sensors are distinguished in particular by multi-connectivity, which permits diversified processing of the generated measured values.
The point clouds can be acquired and evaluated by means of uniVision configurable standard software, or with VisionApp 360 software for combining the point clouds of several 2D/3D sensors. Connection via the GigE Vision standard and the open DLL interface concept permit maximum degrees of freedom for the integration of sensors and the evaluation of their data.

uniVision

uniVision is configurable standard software for weQube – the Smart Camera, for the VisionSystem2D and for weCat3D 2D/3D profile sensors in combination with the wenglor Control Unit. You’ll find an overview of all available software and hardware combinations here.

uniVisionBB1C001uniVision for 2D/3D Sensors

External Software

For the processing of single point clouds of up to 16 weCat3D Sensors, an external IPC and an external software may be used via the integrated interface DLL.

weCat3DVisionApp 360DLL

VisionApp 360 & wenglor Control Unit

Point clouds of up to 16 weCat3D Sensors can be united by using the wenglor software VisionApp 360 and transferred  via the DLL interface to the wenglor Control Unit. The evaluation or processing of the data can happen via an external software.

BB1C001 weCat3DVisionApp 360 DLL

VisionApp 360 & External IPC

Point clouds of up to 16 weCat3D Sensors can be united by using the wenglor software VisionApp 360 and transferred  via the DLL interface to an external IPC. The evaluation or processing of the data can happen via an external software.

DLL & GigE-Vision

The GigE Vision interface and the open DLL interface concept permit maximum degrees of freedom for the integration of sensors and the evaluation of their data.
Measurement data generated by 2D/3D Sensors can also be evaluated via GigE Vision with software from third parties such as Matrox Imaging, Halcon, LabVIEW or EyeVision. The measurement data are suitable for further processing via DLL in C++, C# or Visual Basic.

In order to assure simple system integration, wenglor offers a software development kit (SDK) for all weCat3D sensors, which can be downloaded free of charge.

The software consists of:
• DLL / shared library, 32-bit and 64-bit
• Interface description
• Programming examples for diverse development environments

Download GigE Vision SDK
Download SDK C++ (VS2013)
Download SDK C++ (QT)
Download SDK C#
Download SDK LabView

Contact Form