Illumination Methods Using Ring Lights
Machine Vision ring lights are most commonly used in one of these illumination methods, depending on the working distance (WD).
Low Angle for Short WD
The LMLX low angle light emits light with an angle of incidence at 45°. It can even create an efficient darkfield effect at close working distances.
Brightfield for Medium WD
The LMRX modular ring light without any accessory creates a highly diffuse and very bright light, suited for matte surfaces and fast moving objects.
Brightfield for Large WD
The ZVZF1 ring light emits light with up to 150,000 lux illumination intensity, thus creating a brightfield on large working distances.
LMLX Low Angle Light
The LMLX low angle light is a combination of the LMRX modular ring light and a ZMRG low angle accessory that allows an angle of incidence at 45°.
This vision ring light is ideal for inspecting features on shiny parts and highlighting edges, indents, protrusions and scratches. Applications for this product includes the inspection of dot-peen marked and several types of DPM codes.
This vision ring light is ideal for inspecting features on shiny parts and highlighting edges, indents, protrusions and scratches. Applications for this product includes the inspection of dot-peen marked and several types of DPM codes.
Illuminated Features
Improper illumination – the dot-peen marked code cannot be read.
Illuminated with LMLX low angle light – the dot-peen marked code can be read properly.
LMRX Modular Ring Light
The LMRX series are a range of powerful light rings with a high density of LEDs, providing a wide illumination cone and a lot of diffusion. They cover a large field of view from working distances of 100 mm up to 600 mm. These square ring lights are suitable to illuminate objects with matte surfaces or fast moving objects which require high brightness.
Maximum Modularity
Starting from a diffuse LMRX ring light, the addition of a low angle accessory and dome accessory change the way the light is diffused and directed towards the target.
The following overviews indicate the brightness values for the different working distances measured in ring configuration with white light in continiuous mode. In strobe overdrive mode, brightness is four times higher for LMRX10x and 3.8 times higher for LMRX20x.
LMRX10x Machine Vision Ring Light
| 100 mm | 200 mm | 300 mm | 500 mm | |
|---|---|---|---|---|
| Field of View | 150 × 100 mm | 200 × 150 mm | 250 × 200 mm | - |
| Brightness | 20,160 lux | 7,180 lux | 3,330 lux | - |
LMRX10x Machine Vision Ring Light
|
Field of View
|
|||
|---|---|---|---|
|
100 mm
150 × 100 mm
|
200 mm
200 × 150 mm
|
300 mm
250 × 200 mm
|
500 mm
-
|
|
Brightness
|
|||
|
100 mm
20,160 lux
|
200 mm
7,180 lux
|
300 mm
3,330 lux
|
500 mm
-
|
LMRX20x Machine Vision Ring Light
| 100 mm | 200 mm | 300 mm | 500 mm | |
|---|---|---|---|---|
| Field of View | 200 × 150 mm | 200 × 150 mm | 200 × 200 mm | 400 × 300 mm |
| Brightness | 16,680 lux | 9,470 lux | 4,970 lux | 1,990 lux |
LMRX20x Machine Vision Ring Light
|
Field of View
|
|||
|---|---|---|---|
|
100 mm
200 × 150 mm
|
200 mm
200 × 150 mm
|
300 mm
200 × 200 mm
|
500 mm
400 × 300 mm
|
|
Brightness
|
|||
|
100 mm
16,680 lux
|
200 mm
9,470 lux
|
300 mm
4,970 lux
|
500 mm
1,990 lux
|
Thanks to its unique round/square shape, the LED sections of the modular ring light are divided into four sectors that can be activated in different ways.
Via the control panel, it is possible to choose between 4-sector lighting and 2-sector lighting, thus turning the ring light into two parallel bar lights. Additionally, each individual sector can be activated via remote control (optional M12 × 1, 8-pin).
Sector lighting is available for all light sources (infrared or white and red or cyan).
Via the control panel, it is possible to choose between 4-sector lighting and 2-sector lighting, thus turning the ring light into two parallel bar lights. Additionally, each individual sector can be activated via remote control (optional M12 × 1, 8-pin).
Sector lighting is available for all light sources (infrared or white and red or cyan).
M12 Standard Connector with Five Male Pins
As a standard, the LMRX ring lights are connected via M12 connector with five male pins. This connection includes the following functionalites:
- Power (24 V DC)
- Selection of different operating modes (continuous or strobe mode)
- Dimming from 100% to 30% brightness
Optional M12 Connector with Eight Male Pins
For remote control, the LMRX modular ring light can be connected via M12 connector with eight male pins.
This connection method is needed to use the following additional options the LMRX series offers:
This connection method is needed to use the following additional options the LMRX series offers:
- Individual sector control
- Color control
- Enabling the operating mode strobe overdrive
- Keypad locking
The following overview shows the different levels of homogeneity in relation to the working distance and the field of view respectively.
The flatter the chart, the better the homogeneity.
LMRX10x Machine Vision Ring Light
- Working distance: 50 mm
- Field of view: 150 × 120 mm
- Working distance: 100 mm
- Field of view: 150 × 120 mm
- Working distance: 200 mm
- Field of view: 200 × 150 mm
- Working distance: 300 mm
- Field of view: 250 × 200 mm
LMRX20x Machine Vision Ring Light
- Working distance: 80 mm
- Field of view: 200 × 150 mm
- Working distance: 200 mm
- Field of view: 200 × 150 mm
- Working distance: 300 mm
- Field of view: 250 × 200 mm
- Working distance: 500 mm
- Field of view: 400 × 300 mm
A LMRX ring light can also be used by putting both the light and the camera at a low angle between the target surface and the normal to the surface. This method is useful for reducing glare and highlighting edges, scratches and engraved markings, such as dot peen marked codes on shiny metals.
Lockable Control Panel
- Select the color of the ring light (white/infrared or red/cyan)
- Select the lighting sector
Rugged Design
- IP65 protection
- Aluminum heatsink for extended lifetime
Modular Structure
- Dome and low angle accessories can be mounted easily
- Quick feasibility studies
Different Operating Modes
- Continuous or strobe mode
- Strobe overdrive for high speed applications
ZVZF1 Ring Light
ZVZF1 ring lights are very powerful and bright LED light rings with an illumination intensity of up to 150,000 lux. They are ideally suited for uniform illumination. Thanks to 360° annular floodlighting, shadows can be reduced and image quality can thus be improved. They have narrow LEDs in mono-color and are available in white, red or infrared light.
These Machine Vision ring lights are suitable to illuminate objects with matte surfaces or fast moving objects which require maximum brightness.
These Machine Vision ring lights are suitable to illuminate objects with matte surfaces or fast moving objects which require maximum brightness.
A ZVZF1 ring light can also be used by putting both the light and the camera at a low angle between the target surface and the normal to the surface. This method is useful for reducing glare and highlighting edges, scratches and engraved markings, such as dot peen marked codes on shiny metals.
Comparison of the Different Machine Vision Ring Lights
| Working Distance | Light Source |
Camera Hole |
Connection | Protection Class |
Beam Angle |
Mounting Technology | |
|---|---|---|---|---|---|---|---|
| LMLX Low Angle Light | Short | Diffuse LEDs: White-Infrared Red-Cyan |
80 mm or 130 mm | M12 × 1; 5-pin M12 × 1; 8-pin (optional) |
IP65 | ±65° | ZMRX001 |
| LMRX Modular Ring Light | Medium | Diffuse LEDs: White-Infrared Red-Cyan |
80 mm or 130 mm | M12 × 1; 5-pin M12 × 1; 8-pin (optional) |
IP65 | ±65° | ZMRX001 |
| ZVZF1 Ring Light | Long | Narrow LEDs: White Red Infrared |
50 mm | M12 × 1; 4/5-pin | IP67 | ±33° | WFW07S12AL WFW07S12VA ZMWZF0001 |
| LMLX Low Angle Light | |||||||
|---|---|---|---|---|---|---|---|
|
Working Distance
Short
|
Light
Source
Diffuse LEDs:
White-Infrared
Red-Cyan
|
Camera
Hole
80 mm or 130 mm
|
Connection
M12 × 1; 5-pin
M12 × 1; 8-pin (optional) |
Protection
Class
IP65
|
Beam
Angle
±65°
|
Mounting Technology
|
|
| LMRX Modular Ring Light | |||||||
|
Working Distance
Medium
|
Light
Source
Diffuse LEDs:
White-Infrared
Red-Cyan
|
Camera
Hole
80 mm or 130 mm
|
Connection
M12 × 1; 5-pin
M12 × 1; 8-pin (optional) |
Protection
Class
IP65
|
Beam
Angle
±65°
|
Mounting Technology
|
|
| ZVZF1 Ring Light | |||||||
|
Working Distance
Long
|
Light
Source
Narrow LEDs:
White
Red
Infrared
|
Camera
Hole
50 mm
|
Connection
M12 × 1; 4/5-pin
|
Protection
Class
IP67
|
Beam
Angle
±33°
|
Mounting Technology
|
|
