text.skipToContent text.skipToNavigation

UMD402U035 Distance Sensor

Available from stock
These ultrasonic sensors evaluate the sound reflected from the object. They detect almost any object regardless of the material and its condition. Thanks to the innovative transducer, this sensor has a particularly wide sonic cone at close range. This allows a very wide range of pieces to be reliably detected on conveyor belts. The sensor can only be used in reflex mode operation.

Ultrasonic Data

Working Range 50 ... 400 mm
Measuring Range 350 mm
Reproducibility maximum 1 mm
Linearity Deviation 5 mm
Resolution 0.1 mm
Ultrasonic Frequency 300 kHz
Opening Angle < 12 °
Service Life (T = +25 °C) 100,000 h
Switching Hysteresis 2 mm

Electrical Data

Supply Voltage 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 30 mA
Switching Frequency 20 Hz
Response Time 25 ms
Temperature Range -30 ... 60 °C
Number of Switching Outputs 1
Switching Output Voltage Drop < 2.5 V
PNP Switching Output/Switching Current 100 mA
Analog Output 0...10 V
Synchronous Mode up to 40 sensors
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Lockable yes
Interface IO-Link V1.0
Protection Class III

Mechanical Data

Setting Method Teach-In
Housing Material Stainless steel, V2A (1.4305 / 303)
Sensing face Epoxy resin/glass bubble mixture
Plastic, PBT
Silicone
Full Encapsulation yes
Degree of Protection IP67
Connection M12 × 1; 4/5-pin
Weight 68 g

Safety-relevant Data

MTTFd (EN ISO 13849-1) 828.67 a

Output

PNP NO/NC switchable yes
Analog Output yes
IO-Link yes

Adjustable parameters

Circuit NC
NC/NO
NO
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Connection Diagram

Characteristic response curve

Characteristic curves show the position of the center or the front edge of the measured object (100 × 100 mm plate) at the time of switching.
Ob = Object
Sc = Sonic cone width
Standard sonic cone (center of the measured object)
Extra-narrow sonic cone (center of the measured object)
Standard sonic cone (front edge of the measured object)
Characteristic response curve
Characteristic curves show the position of the center or the front edge of the measured object (Ø 25 mm rod) at the time of switching.
Ob = Object
Sc = Sonic cone width
Standard sonic cone (center of the measured object)
Extra-narrow sonic cone (center of the measured object)

Ctrl. Panel

01 = Switching Status Indicator
06 = Teach Button
79 = Run/Error Indicator

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Sensing Face

Complementary Products

  • IO-Link Master
  • Baffle Plate Z0021, Z0022
  • PNP-NPN Converter BG2V1P-N-2M
  • Analog Evaluation Unit AW02
  • Software
Initial start-up instructions
Operating instructions
Product description file
Product description file
IODD_UMD402U035_V1.1.zip
Interface protocol
Interface protocol
Interface_Protocol_IO-Link_Parameter_Process_Data_UMD402U035.pdf
Declarations of Conformity / Approvals
Product certificates
Product certificates
UMD_IO-Link_V1.0_Manufacturer_declaration.pdf

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison