text.skipToContent text.skipToNavigation

UMD123U035 Distance Sensor

available from stock
These ultrasonic sensors evaluate the sound reflected from the object. They detect almost any object regardless of the material and its condition. Thanks to the innovative transducer, this sensor has a particularly wide sonic cone at close range. This allows a very wide range of pieces to be reliably detected on conveyor belts. The sensor can only be used in reflex mode operation.

Ultrasonic Data

Working Range 100 ... 1,200 mm
Measuring Range 1,100 mm
Reproducibility maximum 2 mm
Linearity Deviation 7 mm
Resolution 0.2 mm
Ultrasonic Frequency 225 kHz
Opening Angle < 12 °
Service Life (T = +25 °C) 100,000 h
Switching Hysteresis 10 mm

Electrical Data

Supply Voltage 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 30 mA
Switching Frequency 7 Hz
Response Time 72 ms
Temperature Range -30 ... 60 °C
Number of Switching Outputs 1
Switching Output Voltage Drop < 2.5 V
PNP Switching Output/Switching Current 100 mA
Analog Output 0...10 V
Synchronous Mode up to 40 sensors
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Lockable yes
Interface IO-Link V1.0
Protection Class III

Mechanical Data

Setting Method Teach-In
Housing Material Stainless Steel
Full Encapsulation yes
Degree of Protection IP67
Connection M12 × 1; 4/5-pin

Safety-relevant Data

MTTFd (EN ISO 13849-1) 829.12 a

Output

PNP NO/NC switchable yes
Analog Output yes
IO-Link yes

Adjustable parameters

Circuit NC
NO
Other parameters Offset
Synchronous mode
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Connection Diagram

Characteristic response curve

Characteristic curves show the position of the center of the measured object (100 × 100 mm plate) at the time of switching.
Ob = Object
Sc = Sonic cone width
Standard
Medium-width
Narrow
Extra-narrow
Characteristic response curve
Characteristic curves show the position of the center of the measured object (Ø 25 mm rod) at the time of switching.
Ob = Object
Sc = Sonic cone width
Standard
Medium-width
Narrow
Extra-narrow

Ctrl. Panel

01 = Switching Status Indicator
06 = Teach Button
79 = Run/Error Indicator

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Sensing Face

Complementary Products

  • IO-Link Master
  • Baffle Plate Z0021, Z0022
  • PNP-NPN Converter BG2V1P-N-2M
  • Analog Evaluation Unit AW02
  • Software
Initial start-up instructions
Operating instructions
Product description file
Product description file
IODD_UMD123U035_V1.0.1.zip
Interface protocol
Interface protocol
Interface_Protocol_IO-Link_Parameter_Process_Data_UMD123U035.pdf
Declarations of Conformity / Approvals
Product certificates
Product certificates
UMD_IO-Link_V1.0_Manufacturer_declaration.pdf

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison