Features at a Glance
- Can be mounted to DIN rail
- One sensor can be connected
- Floating relay output
- Adjustable ON and OFF delay
NT01 Power Supply Unit for Sensors
This power pack is suitable for connection to a proximity switch, e. g. optoelectronic and inductive sensors. A floating relay contact is included as an output.
Electrical Data | |
|---|---|
| Supply Voltage | 230 V AC |
| Power Consumption | < 3 VA |
| Switching Frequency | 10 Hz |
| Response Time | 5 ms |
| On-/Off-Delay | 0 ... 10 s |
| Floating Relay Output | 1 |
| Voltage Output Sensor | 24 V DC |
| Load Current Voltage Output Sensor | 60 mA |
| Switching Voltage Relay Output | 250 V |
| Load Current Relay Output | 10 A |
| Temperature Range | 0 ... 60 °C |
Mechanical Data | |
|---|---|
| Degree of Protection | IP20 |
| DIN-Rail mounting | 35 mm |
| Weight | 256 g |
Standards and certificates |
|---|
|
|
Ctrl. Panel |
|---|
|
10 = ON-Delay/OFF-Delay Switch
11 = ON-Delay/OFF-Delay Adjuster 04 = Function Indicator 01 = Switching Status Indicator |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
|
