text.skipToContent text.skipToNavigation

OPT1504 Reflex Sensor with Background Suppression

Available from stock
These sensors have been specially designed for use in accumulation roller conveyors. Their compact design allows for installation between rollers below the transport level. High-precision background suppression makes it possible to reliably detect even black objects at up to 900 mm. The scaled switching-distance adjuster assures quick and simple adjustment to the desired distance. Thanks to the innovative fast-clip mounting system and quick wiring, the sensor are installed and ready for use in no time flat.

Optical Data

Range 900 mm
Switching Hysteresis  < 5 %
Light Source Infrared Light
Wavelength 860 nm
Service Life (T = +25 °C) 100,000 h
Risk Group (EN 62471) 1
Max. Ambient Light 90,000 Lux
Opening Angle 3 °

Electrical Data

Supply Voltage 23 ... 27.8 V DC
Current Consumption Sensor (Ub = 24 V) < 16 mA
EcoMode yes
Switching Frequency 100 Hz
Response Time 5 ms
Temperature Drift < 5 %
Temperature Range -40 ... 60 °C
Number of Switching Outputs 1
Switching Output Voltage Drop < 0.9 V
PNP Switching Output/Switching Current 200 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Logic yes
Single Discharge yes
Block Forwarding yes
Solenoid Valve yes
Protection Class III

Mechanical Data

Setting Method Potentiometer
Housing Material Plastic, ABS-GF
Degree of Protection IP65
Connection M12 × 1; 4-pin
Cable Length 150 cm
Cable Jacket Material PVC
Weight 257 g

Pneumatic Solenoid Valve Unit

Valve no. K03
Supply Voltage Valve 21.6 ... 26.4 V
Current Consumption Valve 42 mA
Valve temperature range -10 ... 55 °C
Operating Pressure 0 ... 8 bar
Nominal Width 0.9 mm
Nominal flow rate 1 -> 2 22 NL/min
Nominal flow rate 2 -> 3 25 NL/min
Supply-Line Connector Pipe 2× 8×1
Working-Line Connector Pipe 4×1
Valve function 3/2-Way
Switching function NO

Output

PNP NC yes

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Connection Diagram

Switching Distance Deviation

Typical characteristic curve based on white, 90 % remission
Sr = Switching Distance
dSr = Switching Distance Change
black 6 % remission
grey 18 % remission

Ctrl. Panel

30 = Switching Status/Contamination Warning
05 = Switching Distance Adjuster

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode 2 = Receiver Diode Screw M4 = 0.5 Nm

Complementary Products

  • Adapter OPT70N, OPT70S, OPT70P
  • ZPTX001 Quick Mount
Product Comparison