text.skipToContent text.skipToNavigation

Logic Unit for Roller Conveyor Systems OPT1546

Features at a Glance

Optimized performance
Energy savings thanks to EcoMode
Increased capacity thanks to intelligent functions
Time-saving initial start-up with fast-clip mounting system and quick wiring
Wireless settings via NFC

OPT1546 Logic Unit for Roller Conveyor Systems

Available from stock

Added to Your Cart:

Added to your request list:

These devices have been specially designed for use in accumulation roller conveyors. Their compact design allows for installation between rollers below the transport level. They're equipped with their own sensor optics, and object detection is handled by externally connected sensor technology. Settings are entered via wireless NFC, which is even possible in the de-energized state. Thanks to the innovative fast-clip mounting system and quick wiring, the devices are installed and ready for use in no time flat.

Features at a Glance

Optimized performance
Energy savings thanks to EcoMode
Increased capacity thanks to intelligent functions
Time-saving initial start-up with fast-clip mounting system and quick wiring
Wireless settings via NFC

Technical data

Optical Data
Service Life (T = +25 °C)	100,000 h

Electrical Data
Supply Voltage	20.6 ... 30 V DC
Current Consumption Sensor (Ub = 24 V)	< 16 mA
EcoMode	yes
Switching Frequency	100 Hz
Response Time	5 ms
Temperature Range	-40 ... 60 °C
Number of Switching Outputs	2
Switching Output Voltage Drop	< 0.9 V
PNP Switching Output/Switching Current	200 mA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Logic	yes
Single Discharge	yes
Block Forwarding	yes
Solenoid Valve	yes
Automatic Roller Shutdown	yes
Protection Class	III

Mechanical Data
Setting Method	NFC
Housing Material	Plastic, ABS/GF
Degree of Protection	IP65
Connection	M12 × 1; 4-pin
Cable Length	100 cm
Cable Jacket Material	PVC
Weight	238 g

Pneumatic Solenoid Valve Unit
Valve no.	K04
Supply Voltage Valve	19.2 ... 28.8 V
Current Consumption Valve	86 mA
Valve temperature range	-15 ... 50 °C
Operating Pressure	4 ... 7 bar
Nominal Width	0.8 mm
Nominal flow rate 1 -> 2	20 NL/min
Nominal flow rate 2 -> 3	100 NL/min
Supply-Line Connector Pipe	2× 8×1
Working-Line Connector Pipe	4×1
Valve function	3/2-Way
Switching function	NC