text.skipToContent text.skipToNavigation

P1KK004 Retro-Reflex Sensor for Transparent Objects

Available on request.
The retro-reflex sensor for transparent objects, such as clear glass, works with red light and a reflector. It has a IO-Link interface with a data storage function as well as additional configuration and diagnostic options. The interface can also be used to configure the sensor settings (PNP/NPN, NC/NO, switching threshold, error output) as well as for reading out switching statuses and signal values. The dynamic readjustment of the switching threshold function automatically adjusts this for contamination, aging, or temperature deviations, meaning that these factors have almost no effect on functionality.

Optical Data

Range 2,000 mm
Reference Reflector/Reflector Foil RQ100BA
Clear Glass Recognition yes
Smallest Recognizable Part see Table 2
Switching Hysteresis  < 5 %
Light Source Red Light
Polarization Filter yes
Service Life (T = +25 °C) 100,000 h
Max. Ambient Light 10,000 Lux
Light Spot Diameter see Table 1
Single-Lens Optic yes

Electrical Data

Supply Voltage 10 ... 30 V DC
Supply Voltage with IO-Link 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 20 mA
Switching Frequency 1,000 Hz
Switching frequency (speed mode) 2,000 Hz
Response Time 0.5 ms
Response time (speed mode) 0.25 ms
Temperature Drift < 5 %
Temperature Range -40 ... 60 °C
Switching Output Voltage Drop < 2 V
Switching Output/Switching Current 100 mA
Residual Current Switching Output < 50 µA
Short Circuit and Overload Protection yes
Reverse Polarity Protection yes
Lockable yes
Teach Mode NT, MT
Interface IO-Link V1.1
Data Storage yes
Protection Class III

Mechanical Data

Setting Method Teach-In
Housing Material Plastic, ABS/PC
Degree of Protection IP67/IP68
Connection M8 × 1; 4-pin
Optic Cover Plastic, PMMA
Weight 6 g

Safety-relevant Data

MTTFd (EN ISO 13849-1) 2,207.95 a

Output

IO-Link yes
NPN NC, NPN NO yes

Adjustable parameters

Output Push-pull
NPN
PNP
Circuit NC
NC/NO
NO
Other parameters Off-delay
On-delay
Mode of operation
Hysteresis
Switching point
Dynamic readjustment
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Table 1

Working Distance 0,5 m 1,3 m 2 m
Light Spot Diameter 30 mm 100 mm 150 mm
Table 2
Distance, Sensor to Reflector 0,4 m 1 m 2 m
Smallest Recognizable Part 2 mm 5 mm 8 mm

Connection Diagram

Ctrl. Panel

68 = supply voltage indicator
06 = Teach Button
30 = Switching Status/Contamination Warning

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Optical axis Screw M3 = 0,5 Nm

Reflector data

RQ100BA 0 ... 2 m
RE18040BA 0 ... 1.1 m
RQ84BA 0 ... 1.6 m
RR84BA 0 ... 1.9 m
RE9538BA 0 ... 0.7 m
RE6151BM 0 ... 1.5 m
RR50_A 0 ... 1.05 m
RE6040BA 0 ... 1.2 m
RE8222BA 0 ... 0.85 m
RR34_M 0 ... 1 m
RE3220BM 0 ... 0.7 m
RE6210BM 0 ... 0.45 m
RR25_M 0 ... 0.55 m
RR25KP 0 ... 0.3 m
RR21_M 0 ... 0.5 m
ZRAE02B01 0 ... 0.7 m
ZRME01B01 0 ... 0.25 m
ZRME03B01 0 ... 0.9 m
ZRMR02K01 0 ... 0.35 m
ZRMS02_01 0 ... 0.45 m
RF505 0 ... 0.4 m
RF508 0 ... 0.4 m
RF258 0 ... 0.4 m
ZRAF08K01 0 ... 0.4 m
ZRDF03K01 0 ... 1.2 m
ZRDF10K01 0 ... 1.3 m

Complementary Products

  • Reflector, Reflector Foil
  • IO-Link Master
  • Software
Initial start-up instructions
Operating instructions
Product description file
Product description file
IODD_P1KK004_V1.1.zip
Interface protocol
Interface protocol
Interface_Protocol_IO-Link_Parameter_Process_Data_P1KKxxx_High_End.pdf
Declarations of Conformity / Approvals
Product certificates
Product certificates
P1KE_P1KH_P1KK_P1KL_P1KT_IO-Link_V1.1_Manufacturer_declaration.pdf

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison