text.skipToContent text.skipToNavigation

OPT1009 Retro-Reflex Sensor for Transparent Objects

Available from stock
A reflector is required for the operation of retro-reflex sensors. Ten sensors are accommodated in a single housing and are OR-linked to each other. The output is switched as soon as any of the light beams is interrupted, making it possible to monitor a broader field. Even crystal-clear objects, films and sheet products are reliably detected.

Optical Data

Range 4,000 mm
Reference Reflector/Reflector Foil 3 × RQ100BA
Clear Glass Recognition yes
Switching Hysteresis  < 15 %
Light Source Red Light
Polarization Filter yes
Service Life (T = +25 °C) 100,000 h
Max. Ambient Light 10,000 Lux
Single-Lens Optic yes

Electrical Data

Supply Voltage 10 ... 30 V DC
Current Consumption (Ub = 24 V) < 70 mA
Switching Frequency 400 Hz
Response Time 1.25 ms
Temperature Drift < 10 %
Temperature Range -25 ... 60 °C
Switching Output Voltage Drop < 2.5 V
PNP Switching Output/Switching Current 200 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Protection Class III

Mechanical Data

Setting Method Teach-in input
Housing Material Plastic, ABS-GF
Full Encapsulation yes
Degree of Protection IP67
Connection M12 × 1; 4/5-pin
Weight 160 g

Output

PNP NO yes

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Connection Diagram

Ctrl. Panel

01 = Switching Status Indicator
68 = supply voltage indicator

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")

Reflector data

RQ100BA 0 ... 4 m
RE6151BM 0 ... 3 m
RE6040BA 0 ... 3.7 m
Z90R006 0 ... 1.4 m
ZRAE02B01 0 ... 0.5 m
ZRME03B01 0 ... 1 m
RF505 0 ... 0.8 m
ZRAF08K01 0 ... 0.8 m
ZRDF10K01 0 ... 1.5 m

Complementary Products

  • Reflector, Reflector Foil
  • PNP-NPN Converter BG2V1P-N-2M
Initial start-up instructions
Operating instructions
Product Flyers
Declarations of Conformity / Approvals
Product Comparison