text.skipToContent text.skipToNavigation

P1NL101 Retro-Reflex Sensor Universal

Available from stock
The retro-reflex sensor works with red light and a reflector. It also reliably detects objects with reflective or glossy surfaces at high speeds. Thanks to its great range, the sensor can, for example, be used to manage feed and presence controls as well as to detect objects on wide feed belts. The IO-Link interface can be used to configure retro-reflective barriers (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.

Optical Data

Range 7,000 mm
Reference Reflector/Reflector Foil RQ100BA
Min. Distance to Reflector 0 mm
Smallest Recognizable Part see Table 2
Switching Hysteresis  < 15 %
Light Source Red Light
Polarization Filter yes
Service Life (T = +25 °C) 100,000 h
Max. Ambient Light 10,000 Lux
Light Spot Diameter see Table 1
Single-Lens Optic yes

Electrical Data

Supply Voltage 10 ... 30 V DC
Supply Voltage with IO-Link 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 20 mA
Switching Frequency 2,000 Hz
Switching frequency (speed mode) 3,500 Hz
Response Time 0.25 ms
Response time (speed mode) 0.14 ms
Temperature Drift < 10 %
Temperature Range -40 ... 60 °C
Switching Output Voltage Drop < 2 V
Switching Output/Switching Current 100 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Interface IO-Link V1.1
Protection Class III

Mechanical Data

Setting Method Potentiometer
Housing Material Plastic, ABS/PC
Degree of Protection IP67/IP68
Connection M12 × 1; 4-pin
Optic Cover Plastic, PMMA
Weight 30 g

Safety-relevant Data

MTTFd (EN ISO 13849-1) 2,690.44 a

Output

IO-Link yes
PNP NC, PNP NO yes

Adjustable parameters

Output Push-pull
NPN
PNP
Circuit NC
NC+NO
NO
Other parameters Off-delay
On-delay
Mode of operation
Hysteresis
Emitted light
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Table 1

Working Distance 1,5 m 3,5 m 7 m
Light Spot Diameter 60 mm 120 mm 250 mm
Table 2
Distance, Sensor to Reflector 1,5 m 3,5 m 7 m
Smallest Recognizable Part 10 mm 6 mm 15 mm

Connection Diagram

Ctrl. Panel

30 = Switching Status/Contamination Warning
05 = Switching Distance Adjuster
68 = supply voltage indicator

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Optical axis Screw M4 = 0.5 Nm

Reflector data

RQ100BA 0 ... 7 m
RE18040BA 0 ... 5 m
RQ84BA 0 ... 5.8 m
RR84BA 0 ... 7 m
RE9538BA 0 ... 2.5 m
RE6151BM 0 ... 5.2 m
RR50_A 0 ... 5 m
RE6040BA 0 ... 5.7 m
RE8222BA 0 ... 3.4 m
RR34_M 0 ... 3 m
RE3220BM 0 ... 2.5 m
RE6210BM 0 ... 1.8 m
RR25_M 0 ... 2.2 m
RR25KP 0 ... 1.3 m
RR21_M 0 ... 1.4 m
Z90R004 0.15 ... 2.2 m
Z90R005 0.15 ... 3.6 m
ZRAE02B01 0 ... 3.1 m
ZRME01B01 0 ... 0.9 m
ZRME03B01 0 ... 3.2 m
ZRMR02K01 0 ... 1.1 m
RF505 0 ... 2.1 m
RF508 0 ... 2.1 m
RF258 0 ... 1.8 m
ZRDF03K01 0 ... 4.5 m
ZRDF10K01 0 ... 5.5 m

Complementary Products

  • Reflector, Reflector Foil
  • Dust Extraction Tube STAUBTUBUS-03
  • IO-Link Master
  • Set Protective Housing Z1NS001
  • Software
Initial start-up instructions
Operating instructions
Product description file
Product description file
IODD_P1NL101_V1.1.zip
Interface protocol
Interface protocol
Interface_Protocol_IO-Link_Parameter_Process_Data_P1NLxxx.pdf
Declarations of Conformity / Approvals
Product certificates
Product certificates
P1NE_P1NH_P1NK_P1NL_IO-Link_V1.1_Manufacturer_declaration.pdf

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison