text.skipToContent text.skipToNavigation

P1KL018 Retro-Reflex Sensor Universal

Available from stock
The retro-reflex sensor works with a fine laser beam and a reflector. The focused laser class 1 laser beam detects objects, for instance, during installation, feed or presence checks, starting at a size of 0.25 mm over the entire range. The IO-Link interface can be used to configure retro-reflex sensors (PNP/NPN, NC/NO, switching distance) and to output switching statuses and signal values.

Optical Data

Range 3,000 mm
Reference Reflector/Reflector Foil RE6151BM
Smallest Recognizable Part 0.15 mm
Switching Hysteresis  < 15 %
Light Source Laser focused (red)
Wavelength 680 nm
Polarization Filter yes
Service Life (T = +25 °C) 100,000 h
Laser Class (EN 60825-1) 1
Max. Ambient Light 10,000 Lux
Light Spot Diameter 0.5 mm
Focus Distance 180 ... 220 mm
Two-Lens Optic yes

Electrical Data

Supply Voltage 10 ... 30 V DC
Supply Voltage with IO-Link 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 15 mA
Switching Frequency 2,000 Hz
Switching frequency (speed mode) 4,000 Hz
Response Time 0.25 ms
Response time (speed mode) 0.125 ms
Temperature Drift < 10 %
Temperature Range -40 ... 60 °C
Switching Output Voltage Drop < 2 V
Switching Output/Switching Current 100 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Lockable yes
Interface IO-Link V1.1
Protection Class III
FDA Accession Number 1710976-001

Mechanical Data

Setting Method Potentiometer
Housing Material Plastic, ABS/PC
Degree of Protection IP67/IP68
Connection M8 × 1; 3-pin
Optic Cover Plastic, PMMA
Weight 27 g

Safety-relevant Data

MTTFd (EN ISO 13849-1) 2,617.62 a

Output

IO-Link yes
PNP NO yes

Adjustable parameters

Output Push-pull
NPN
PNP
Circuit NC
NO
NC/NO
Other parameters Off-delay
On-delay
Mode of operation
Hysteresis
Emitted light
Switching point
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Table 1

Working Distance 0,1 m 1 m 3 m
Light Spot Diameter 1 mm 8 mm 28 mm

Connection Diagram

Ctrl. Panel

05 = Switching Distance Adjuster
30 = Switching Status/Contamination Warning
68 = supply voltage indicator

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode 2 = Receiver Diode Screw M3 = 0,5 Nm

Reflector data

RQ100BA 0.4 ... 3 m
RE18040BA 0.4 ... 3 m
RQ84BA 0.4 ... 3 m
RR84BA 0.4 ... 3 m
RE9538BA 0.4 ... 2.4 m
RE6151BM 0.35 ... 3 m
RR50_A 0.4 ... 3 m
RE6040BA 0.4 ... 3 m
RE8222BA 0.4 ... 3 m
RR34_M 0.35 ... 3 m
RE3220BM 0.35 ... 2 m
RE6210BM 0.35 ... 1.9 m
RR25_M 0.35 ... 2.2 m
RR25KP 0.35 ... 0.9 m
RR21_M 0.35 ... 2 m
Z90R004 0.15 ... 1.5 m
Z90R005 0.15 ... 2.3 m
ZRAE02B01 0.4 ... 2.5 m
ZRME01B01 0.35 ... 1.2 m
ZRME03B01 0.35 ... 1.7 m
ZRMR02K01 0.35 ... 1.5 m
ZRMS02_01 0.35 ... 1.9 m
RF505 0.35 ... 1.2 m
RF508 0.35 ... 1.1 m
RF258 0.35 ... 1.1 m
ZRDF03K01 0.3 ... 3 m
ZRDF10K01 0.3 ... 3 m

Complementary Products

  • Reflector, Reflector Foil
  • IO-Link Master
  • Software
Initial start-up instructions
Operating instructions
Product description file
Product description file
IODD_P1KL018_V1.1.zip
Interface protocol
Interface protocol
Interface_Protocol_IO-Link_Parameter_Process_Data_P1KLxxx.pdf
Declarations of Conformity / Approvals
Product certificates
Product certificates
P1KE_P1KH_P1KK_P1KL_P1KT_IO-Link_V1.1_Manufacturer_declaration.pdf

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison