text.skipToContent text.skipToNavigation

P1KL003 Retro-Reflex Sensor Universal

Available from stock
The retro-reflex sensor works with red light and a reflector. It also reliably detects objects with reflective or glossy surfaces at high speeds. Thanks to its great range, the sensor can, for example, be used to manage feed and presence controls as well as to detect objects on wide feed belts. The IO-Link interface can be used to configure retro-reflective barriers (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.

Optical Data

Range 5,000 mm
Reference Reflector/Reflector Foil RQ100BA
Smallest Recognizable Part see Table 2
Switching Hysteresis  < 10 %
Light Source Red Light
Polarization Filter yes
Service Life (T = +25 °C) 100,000 h
Max. Ambient Light 10,000 Lux
Light Spot Diameter see Table 1
Two-Lens Optic yes

Electrical Data

Supply Voltage 10 ... 30 V DC
Supply Voltage with IO-Link 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 20 mA
Switching Frequency 2,000 Hz
Switching frequency (speed mode) 3,500 Hz
Response Time 0.25 ms
Response time (speed mode) 0.14 ms
Temperature Drift < 10 %
Temperature Range -40 ... 60 °C
Switching Output Voltage Drop < 2 V
Switching Output/Switching Current 100 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Lockable yes
Interface IO-Link V1.1
Protection Class III

Mechanical Data

Setting Method Potentiometer
Housing Material Plastic, ABS/PC
Degree of Protection IP67/IP68
Connection M12 × 1; 4-pin
Cable Length 20 cm
Cable Jacket Material Plastic, PUR
Optic Cover Plastic, PMMA
Weight 20 g

Safety-relevant Data

MTTFd (EN ISO 13849-1) 2,808.97 a

Output

IO-Link yes
PNP NC, PNP NO yes

Adjustable parameters

Output Push-pull
NPN
PNP
Circuit NC
NO
inactive
Error output
NC+NO
Other parameters Off-delay
On-delay
Mode of operation
Hysteresis
Emitted light
Switching point
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf
* Temperature range with permanently installed cable, bending radius: > 20 mm

Table 1

Working Distance 0,2 m 2 m 5 m
Light Spot Diameter 30 mm 180 mm 400 mm
Table 2
Distance, Sensor to Reflector 1 m 2,5 m 5 m
Smallest Recognizable Part 10 mm 20 mm 30 mm

Connection Diagram

Ctrl. Panel

05 = Switching Distance Adjuster
30 = Switching Status/Contamination Warning
68 = supply voltage indicator

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode 2 = Receiver Diode Screw M3 = 0,5 Nm

Reflector data

RQ100BA 0.01 ... 5 m
RE18040BA 0.01 ... 4.5 m
RQ84BA 0.01 ... 4.5 m
RR84BA 0.01 ... 4.5 m
RE9538BA 0.01 ... 2 m
RE6151BM 0.01 ... 3.5 m
RR50_A 0.01 ... 3 m
RE6040BA 0.01 ... 3.5 m
RE8222BA 0.01 ... 2.5 m
RR34_M 0.01 ... 0.6 m
RE3220BM 0.01 ... 1.5 m
RE6210BM 0.01 ... 1.5 m
RR25_M 0.01 ... 1.3 m
RR25KP 0.01 ... 0.8 m
RR21_M 0.01 ... 1.1 m
Z90R004 0.15 ... 1.65 m
Z90R005 0 ... 2.3 m
ZRAE02B01 0.01 ... 2 m
ZRME01B01 0.01 ... 0.9 m
ZRME03B01 0.01 ... 1.6 m
ZRMR02K01 0.01 ... 1 m
ZRMS02_01 0.01 ... 1 m
RF505 0.02 ... 1.9 m
RF508 0.02 ... 1.7 m
RF258 0.02 ... 1.4 m
ZRDF03K01 0.03 ... 3 m
ZRDF10K01 0.03 ... 3.5 m

Complementary Products

  • Reflector, Reflector Foil
  • IO-Link Master
  • Software
Initial start-up instructions
Operating instructions
Product description file
Product description file
IODD_P1KL003_V1.1.zip
Interface protocol
Interface protocol
Interface_Protocol_IO-Link_Parameter_Process_Data_P1KLxxx.pdf
Declarations of Conformity / Approvals
Product certificates
Product certificates
P1KE_P1KH_P1KK_P1KL_P1KT_IO-Link_V1.1_Manufacturer_declaration.pdf

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison