text.skipToContent text.skipToNavigation

HT60MGV80 Reflex Sensor with Background Suppression

Available from stock
These sensors are equipped with an analog output, as well as a digital output. The upper and lower switching points of the digital output can be adjusted with two potentiometers. The digital output is activated when an object is located within the window defined in this way.

Optical Data

Working Range 300 ... 600 mm
Measuring Distance 450 mm
Measuring Range 300 mm
Resolution see Table 1
Linearity 1 %
Switching Hysteresis 20 mm
Light Source Red Light
Wavelength 660 nm
Service Life (T = +25 °C) 100,000 h
Max. Ambient Light 10,000 Lux
Light Spot Diameter see Table 1

Electrical Data

Supply Voltage 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 50 mA
Cut-Off Frequency 50 Hz
Response Time 10 ms
Temperature Drift 100 µm/K
Temperature Range -10 ... 60 °C
Switching Output Voltage Drop < 2.5 V
PNP Switching Output/Switching Current 200 mA
Error Output Voltage Drop < 2.5 V
PNP Error Output/Switching Current 200 mA
Analog Output 0...10 V
Output Current Analog Output 500 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Protection Class III

Mechanical Data

Housing Material Plastic, PBT
Degree of Protection IP67
Connection M12 × 1; 8-pin
Weight 191 g

Output

Error Output yes
PNP NO yes
Analog Output yes

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Table 1

Working Distance 300 mm 450 mm 600 mm
Light Spot Diameter 10 mm 15 mm 20 mm
Resolution 0,3 mm 2 mm 5 mm

Connection Diagram

Error of Measurement

Typical characteristic curve based on white, 90 % remission
S = Measuring Distance
dS = Deviation
black 6 % remission
grey 18 % remission

Ctrl. Panel

01 = Switching Status Indicator
13 = Upper Potentiometer
14 = Lower Potentiometer
33 = Analog Voltage Output-/Error Warning

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Receiver Diode 2 = Transmitter Diode 3 = Receiver Diode Screw M4 = 1 Nm

Complementary Products

  • Analog Evaluation Unit AW02
Product Comparison