text.skipToContent text.skipToNavigation
  • Analog output 0…10 V
  • Wide working range and precise detection thanks to DS technology
  • No interactive influence
  • Intuitive operating concept

P1PY107 Laser Distance Sensor Long-Range

available from stock
The sensors function in accordance with the principle of transit time measurement with laser class 1. The wintec with Dynamic Sensitivity technology (DS) enables previously unattainable reception sensitivity even with very weak signals. As a result, the sensors have a large working range of up to 10 m and can reliably detect dark or shiny objects even at extreme angles. wintec also works very reliably in adverse ambient conditions, e.g., caused by ambient light or dirt. Extensive condition monitoring functions additionally enable predictive maintenance and trouble-free operation.
Optical Data
Working Range 0 ... 10,000 mm
Adjustable Range 50 ... 10,000 mm
Reproducibility maximum 3 mm*
Linearity Deviation 10 mm*
Light Source Laser (red)
Wavelength 660 nm
Service Life (T = +25 °C) 100,000 h
Laser Class (EN 60825-1) 1
Beam Divergence < 2 mrad
Max. Ambient Light 100,000 Lux
Light Spot Diameter see Table 1
Electrical Data
Supply Voltage 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 40 mA
Measuring Rate 100 /s*
Measuring Rate (max.) 500 /s*
Temperature Drift < 0.4 mm/K
Temperature Range -40 ... 50 °C
Analog Output 0...10 V
Reverse Polarity and Overload Protection yes
Short Circuit Protection yes
Interface IO-Link V1.1
Baud Rate COM3
Protection Class III
FDA Accession Number 2110079-001
Mechanical Data
Setting Method Teach-In
Housing Material Plastic
Optic Cover PMMA
Degree of Protection IP67/IP68
Connection M12 × 1; 4/5-pin
Safety-relevant Data
MTTFd (EN ISO 13849-1) 508.83 a
Error Output yes
Analog Output yes
IO-Link yes
Adjustable parameters
Output Error Output
Warning output
Other parameters Off-delay
Emitted light
Sensor localization
Key illumination
Teach mode
Unit of measure
Measuring mode
All other parameters can be found in the product documentation.
Standards and certificates
B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf
* Depends on mode, see table 2
Table 1
Working Distance 0 m 5 m 10 m
Light Spot Diameter 5 mm 10 mm 15 mm
Table 2
Connection Diagram
- = supply voltage 0 V
+ = supply voltage +
E/A1 = programmable input/output / IO-Link
E3 = input
O = analog output
Ctrl. Panel
06 = Teach Button
68 = supply voltage indicator
5a = Switching Status Display, O1
12 = Analog Output Indicator
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode 2 = Receiver Diode Screw M4 = 0,5 Nm
Complementary Products
  • IO-Link Master
  • Software
Initial start-up instructions
Operating instructions
Product description file
Product description file
Interface protocol
Interface protocol
EU Declaration of Conformity
Product certificates
Product certificates
Product Comparison