text.skipToContent text.skipToNavigation

P1PY002 Laser Distance Sensor Time of Flight

Available from stock
These sensors have scratch-resistant optics and the emitted light can be switched off. They use the transit time measurement principle to measure the distance between the sensor and the object. wenglor interference-free technology (wintec) has revolutionized sensor technology: It makes it possible to mount several sensors directly next to, or opposite each other without the sensors influencing each other. The sensors reach a very high switching frequency and use laser class 1, which is safe for the human eye.

Optical Data

Working Range 0 ... 3,000 mm
Setting Range 200 ... 3,000 mm
Switching Hysteresis  < 15 mm
Light Source Laser (red)
Wavelength 660 nm
Service Life (T = +25 °C) 100,000 h
Laser Class (EN 60825-1) 1
Beam Divergence < 2 mrad
Max. Ambient Light 10,000 Lux
Light Spot Diameter see Table 1
Reflector required no

Electrical Data

Supply Voltage 10 ... 30 V DC
Supply Voltage with IO-Link 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 40 mA
Switching Frequency 500 Hz
Response Time 1 ms
Temperature Drift (-10 °C < Tu < 50 °C) < 1 %
Temperature Drift (Tu < -10 °C, Tu > 50 °C) < 2.5 %
Temperature Range -40 ... 60 °C
Number of Switching Outputs 2
Switching Output Voltage Drop < 2.5 V
Switching Output/Switching Current 200 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Interface IO-Link V1.1
Protection Class III
FDA Accession Number 1910001-001

Mechanical Data

Setting Method Teach-In
Housing Material Plastic, ABS
Plastic, PC
Cable Jacket Material Plastic, PUR
Optic Cover Plastic, PMMA
Degree of Protection IP68
Connection M12 × 1; 4/5-pin
Cable Length 500 mm
Weight 88 g

Safety-relevant Data

MTTFd (EN ISO 13849-1) 949.92 a

Output

PNP NO yes
IO-Link yes

Adjustable parameters

Output NPN
PNP
Circuit NC
NO
Other parameters Off-delay
On-delay
Emitted light
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf
* Temperature range with permanently installed cable, bending radius: > 40 mm

Table 1

Working Distance 0 m 3 m
Light Spot Diameter 5 mm 9 mm

Connection Diagram

Switching Distance Deviation

Typical characteristic curve based on white, 90 % remission
Sr = Switching Distance
dSr = Switching Distance Change
black 6 % remission
grey 18 % remission

Ctrl. Panel

06 = Teach Button
68 = supply voltage indicator
5a = Switching Status Indicator, A1
6a = Switching Status Indicator, A2

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode 2 = Receiver Diode Screw M4 = 0.5 Nm

Complementary Products

  • Set Protective Housing ZSP-NN-02
  • Protective Housing ZSV-0x-01
  • IO-Link Master
  • Software
Initial start-up instructions
Operating instructions
Product description file
Product description file
IODD_P1PY002_V1.1.zip
Interface protocol
Interface protocol
Interface_Protocol_IO-Link_Parameter_Process_Data_P1PYxxx.pdf
Declarations of Conformity / Approvals
Product certificates
Product certificates
P1PY_IO-Link_V1.1_Manufacturer_declaration.pdf

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison