text.skipToContent text.skipToNavigation
  • CMOS line array
  • Highly accurate switching distance
  • Minimal switching hysteresis
  • Switching point independent of material, color and brightness

CP70QXVT80S806 Laser Distance Sensor High-Precision

These sensors work with a high resolution CMOS line and DSP technology and calculate the distance via an angle measurement. This virtually eliminates switching point differences caused by material, color and brightness. Two independent switching outputs are available, at which two switching thresholds and one on-delay or off-delay time can be set in 10 ms increments. Sensor functions can be activated and values can be output via the RS-232 interface.
Optical Data
Range 800 mm
Adjustable Range 60 ... 800 mm
Switching Hysteresis  < 1 %
Light Source Laser (red)
Wavelength 655 nm
Service Life (T = +25 °C) 100,000 h
Laser Class (EN 60825-1) 2
Max. Ambient Light 10,000 Lux
Electrical Data
Supply Voltage 10 ... 30 V DC
Current Consumption (Ub = 24 V) < 50 mA
Switching Frequency 150 Hz
Response Time 3,300 µs
On-/Off-Delay (RS-232) 0 ... 1 s
Temperature Drift < 80 µm/K
Temperature Range -25 ... 60 °C
Number of Switching Outputs 2
Switching Output Voltage Drop < 1.5 V
Switching Output/Switching Current 200 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Teach Mode HT, VT, TP
Interface RS-232
Baud Rate 38,400 Bd
Protection Class III
Mechanical Data
Setting Method Teach-In
Housing Material Plastic
Degree of Protection IP67
Connection M12 × 1; 8-pin
Adjustable parameters
Output Error Output
Push-pull
NPN
PNP
Other parameters Off-delay
On-delay
Exposure time
Laser light
Switching hysteresis
Teach-in mode
All other parameters can be found in the product documentation.
Standards and certificates
B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf
Table 1
Detection Range 60 mm 800 mm
Spot Size 0,6 × 2,5 mm 4 × 10 mm
Connection Diagram
Ctrl. Panel
07 = Selector Switch
24 = Plus Button
25 = Minus Button
03 = Error Indicator
01 = Switching Status Indicator
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode 2 = Receiver Diode Screw M4 = 0,5 Nm
Complementary Products
  • Interface Cable S232W3
  • Fieldbus Gateway ZAGxxxN01, EPGG001
Product Comparison
3/4
4/4
5/4
6/4