text.skipToContent text.skipToNavigation

Mounting A/B/C/D

Mounting A/B/C/D describes the minimum dimensions with which an inductive sensor can be installed in metal. The values refer to the outer edge of the sensor. The individual values have the following meanings: A Minimum distance from sensor to damping material (e.g. steel). B Minimum distance between two inductive sensors. This distance applies to installation in air. If the sensors are installed within an attenuating material (e.g. steel), this distance is reduced. Testing in the application is required in order to determine the exact distance. C Minimum distance from sensing face of inductive sensor to damping material (e.g. steel). The distance does not refer to the object to be detected, but rather to the background. The object to be recognized is detected within the switching distance. D Minimum dimension by which the sensor or its sensing face must protrude from the damping material (e.g. steel). See also: mounting B1, weproTec, mounting on opposite sides, flush mounting, semi-flush mounting, non-flush mounting, standard target
Product Comparison