text.skipToContent text.skipToNavigation

ZAC51EN01 Switch

available on request
This switch allows simple connecting of up to seven Industrial Ethernet products. In addition, up to four PNP sensors and actuators can be connected via two digital I/O ports.

Electrical Data

Supply Voltage 18 ... 32 V
Power consumption of device max. 0.3 A
Power consumption of system max. 0.3 A
Max. Switching Current Switching Outputs 0.6 A
max. total current of the digital I/O ports 1 A
Switching Output Voltage Drop < 2.5 V
Temperature Range -25 ... 60 °C
Digital I/O ports short circuit protected yes
Digital I/O ports overload protected yes
Digital I/O ports reverse polarity protected yes
Number of digital I/O ports 2
Baud Rate 10/100 Mbit/s
Transmission Mode Full/Half Duplex
Switch Mode Store & Forward
VLAN Prioritization yes
Auto-Crossover yes
Auto-Negotiating yes
Auto-Polarity yes
Interface EtherNet/IP™
Protection Class III

Mechanical Data

Material Aluminum
Weight 1,265 g
Degree of Protection IP67
Type of Connection Power 2 × 7/8", 5-pin
Type of Connection Industrial Ethernet Ports 7 × M12; 4-pin
Type of connection digital I/O ports 2 × M12; 4-pin

General Data

Web server yes


EtherNet/IP™ yes

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Connection Table


Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")

Complementary Products

  • Locking Screw for 7/8" Z0028
  • Locking Screw for M12 Z0027
Initial start-up instructions
Operating instructions
Quick-start guide
General instructions
General instructions
Change_IP_adress_Windows7-10.pdf Start-Up-EthernetIP-Device.pdf
Product description file
Product description file
EDS_ZAC51EN01_V1.1.zip EDS_ZAC51EN01_V1.3.zip
Declarations of Conformity / Approvals
Product certificates
Product certificates
Product Comparison