text.skipToContent text.skipToNavigation

INTT251 Inductive Analysis Module for Extreme Temperature Ranges

Available from stock
The inductive high-temperature sensors, consisting of a sensor head and an analysis module with cable, are designed for use in very hot work environments. Long switching distances and a long service life in hot areas ensure maximum system reliability. Sensor heads can be replaced without the use of tools, and numerous standard cable lengths with integrated analysis module are available separately. weproTec technology makes it possible to install the sensors directly next to or opposite one another. In addition, IO-Link can be used to individually configure sensor parameters like switching distance and output functions.

Electrical Data

Supply Voltage 10 ... 30 V DC
Supply Voltage with IO-Link 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 15 mA
Switching Frequency 50 Hz
Temperature range of the plug 0 ... 70 °C
Number of Switching Outputs 2
Switching Output Voltage Drop < 1 V
Switching Output/Switching Current 100 mA
Residual Current Switching Output < 100 µA
Short Circuit Protection yes
Reverse Polarity and Overload Protection yes
Interface IO-Link V1.1
Protection Class III

Mechanical Data

Housing Material Aluminum, anodised
Sensing face Plastic, PEEK
Analysis module material Stainless Steel V2A
Plastic, PEEK
PTFE
Brass, chrome-plated
Degree of protection, sensor head IP50
Degree of protection of the plug IP50
Connection M12 × 1; 4-pin
Cable Length (L) 20 m
Outer diameter cable 3.7 mm
Bending Radius > 18.5 mm
PWIS-free yes
Weight 977 g

Safety-relevant Data

MTTFd (EN ISO 13849-1) 3,706.54 a

Function

Error Indicator yes
Programmable switching distance 15/20/25 mm

Output

IO-Link yes
Error Output yes
PNP NO yes

Adjustable parameters

Output Push-pull
NPN
PNP
Circuit NC
NC/NO
NO

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Connection Diagram

Ctrl. Panel

01 = Switching Status Indicator

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Switching Status Indicator 2 = Push-Pull connector

Complementary Products

  • IO-Link Master
  • Inductive sensor head
  • Software
Initial start-up instructions
Operating instructions
System solution
Product description file
Product description file
IODD_INTT251_V1.1.zip
Interface protocol
Interface protocol
Interface_Protocol_IO-Link_Parameter_Process_Data_INTT_V1.1.pdf
Declarations of Conformity / Approvals
Product certificates
Product certificates
INTT2_INTT3_IO-Link_V1.1_Manufacturer_declaration.pdf INTT2_INTT3_PWIS_Manufacturer_declaration.pdf

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison