text.skipToContent text.skipToNavigation
  • Simple operation via the display
  • Highly visible output indicator

FFAP030 Pressure Sensor

available from stock
UniBar pressure sensors measure the relative pressure in closed systems of any medium in the range -1...600 bar. UniBar pressure sensors are very easy to use thanks to the integrated display. The highly visible switching status display enables the rapid localization of affected sensors for maintenance processes.
Sensor-specific data
Measuring Range 0 ... 0.1 bar
Measurement Type relative
Maximum overload pressure 1 bar
Bursting pressure 1.5 bar
Adjustable Range 4 ... 100 %
Medium Liquids, gases
Switching Hysteresis 2 %
Measuring error < ± 0.5 %
Temperature Drift 0.025 %/K
Environmental conditions
Temperature of medium -25 ... 80 °C
Ambient temperature -25 ... 80 °C
EMC DIN EN 61326-2-3
Shock resistance per DIN IEC 68-2-27 30 g / 11 ms
Vibration resistance per DIN IEC 60068-2-6 20 g (10...2000 Hz)
Electrical Data
Supply Voltage 16 ... 32 V DC
Current Consumption (Ub = 24 V) < 60 mA
Number of Switching Outputs 1
Response Time 30 ms
Switching Output/Switching Current < 250 mA
Switching Output Voltage Drop < 2 V
Analog Output 0...10 V
Signal source Pressure
Resolution 10 bit
Short Circuit Protection yes
Reverse Polarity Protection yes
Protection Class III
Mechanical Data
Setting Method Menu
Housing Material PBT; PC; FKM
Material Control Panel Polyester
Material in contact with media 1.4435; 1.4404
Degree of Protection IP65 *
Connection M12 × 1; 4-pin
Process Connection G 1/2"
Safety-relevant Data
MTTFd (EN ISO 13849-1) 1,201.51 a
Output
Analog Output yes
PNP NO yes
Adjustable parameters
Signal source Pressure
Circuit NC
NC/NO
NO
Other parameters Selectable measurement range
Switching point
All other parameters can be found in the product documentation.
Standards and certificates
B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf
* Certified by wenglor
Connection Diagram
Ctrl. Panel
01 = Switching Status Indicator
60 = display
20 = Enter key
22 = Up key
99 = Right button
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")
B_SYM_SCHLUESSEL_27.pdf Wrench Size
Complementary Products
  • Seal G1/2" ZH5G002
Operating instructions
General instructions
General instructions
Declaration_of_Decontamination.pdf
EU Declaration of Conformity
Product Comparison
3/4
4/4
5/4
6/4