text.skipToContent text.skipToNavigation

MLAS102 3D Sensor

ShapeDrive MLAS 3D Sensors are distinguished by high precision for minimal measuring volumes. The ten models in this series are available in two performance classes with camera resolutions of 5 and 12 megapixels. All ShapeDrive sensors are ideally suited for use in industrial environments thanks to the rugged IP65 housing. With its 10 Gigabit Ethernet interface and five measuring ranges in each performance class, ShapeDrive is also distinguished by great diversity and high speed.

Optical Data

Working range Z 300 ... 340 mm
Measuring range Z 40 mm
Measuring range X 60 mm
Measuring range Y 48 mm
Resolution Z 6 µm
Resolution X/Y 35 µm
Camera Resolution 2,448 × 2,048 Pixel
Light Source LED (blue)
Wavelength 460 nm
Service Life (T = +25 °C) 20,000 h
Risk Group (EN 62471) 2

Environmental conditions

Ambient temperature 0 ... 35 °C
Storage temperature -5 ... 70 °C
Max. Ambient Light 5,000 Lux
EMC DIN EN 61000-6-2; 61000-6-4

Electrical Data

Supply Voltage 18 ... 30 V DC
Max. Current Consumption (Ub = 24 V) 3.5 A
Acquisition time 0.35 ... 2.15 s
Short Circuit Protection yes
Reverse Polarity Protection yes
Interface Ethernet TCP/IP
Baud Rate 100 Mbit/s
Baud Rate (10 GbE) 10 Gbit/s
Protection Class III

Mechanical Data

Housing Material Aluminium; Plastic
Degree of Protection IP65
Connection M12 × 1; 12-pin
Type of Connection Ethernet M12 × 1; 8-pin, X-cod.
Optic Cover Plastic
Weight 2,500 g

General Data

Web server yes

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Connection Diagram

Measuring Volume

Ctrl. Panel

78 = Module status
85 = Link/Act LED

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")

Complementary Products

  • Tripod adapter ZLBM001
Operating instructions
Quick-start guide
Soft- and Firmware
Soft- and Firmware
Firmware_ShapeDrive_MLAS_MLBS_1.0.2.zip Firmware_ShapeDrive_MLAS_MLBS_1.1.2.zip ShapeDrive_Essential_1.0.0.zip ShapeDrive_Essential_Linux_1.0.0.tar.gz ShapeDrive_SDK_Windows_Linux_x64_1.5.0.zip ShapeDrive_SDK_Windows_x64_1_5_1.zip
Interface protocol
Interface protocol
Interface_Protocol_MLAS_MLBS.pdf
Declarations of Conformity / Approvals

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison