text.skipToContent text.skipToNavigation
  • Secure detection of black objects also in extremely inclined positions with wintec
  • No mutual interference with wintec
  • Interference-free towards gloss in the background with wintec
  • Reliable in case of glossy objects with wintec
  • Miniature design
  • 2 mutually independent switching outputs

P1KY005 Laser Distance Sensor Long-Range

available on request
These miniature sensors determine distance between the sensor and the object by means of transit time measurement. wenglor's interference-free technology (wintec) is revolutionizing sensor technology: it prevents numerous sensors arranged directly opposite or next to each other from interfering with one another. The sensors reach a very high switching frequency and use laser class 1, which is safe for the human eye.

Optical Data

Working Range 0 ... 1,000 mm
Setting Range 100 ... 1,000 mm
Switching Hysteresis  < 20 mm
Light Source Laser (red)
Wavelength 680 nm
Service Life (T = +25 °C) 100,000 h
Laser Class (EN 60825-1) 1
Beam Divergence < 16 mrad
Max. Ambient Light 10,000 Lux
Light Spot Diameter see Table 1
Triple Dot Laser yes

Electrical Data

Supply Voltage 10 ... 30 V DC
Supply Voltage with IO-Link 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 30 mA
Switching Frequency 500 Hz
Response Time 1 ms
Temperature Drift (-10 °C < Tu ≤ 50 °C) < 2 %
Temperature Drift (-40 °C < Tu ≤ 50 °C) < 3 %
Temperature Range -40 ... 50 °C
Number of Switching Outputs 2
Switching Output Voltage Drop < 2.5 V
Switching Output/Switching Current 100 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Interface IO-Link V1.1
Protection Class III
FDA Accession Number 1620293-001

Mechanical Data

Setting Method Teach-In
Housing Material Plastic
Optic Cover PMMA
Degree of Protection IP67
Connection M8 × 1; 4-pin

Safety-relevant Data

MTTFd (EN ISO 13849-1) 1,021.76 a


PNP NO/NC antivalent yes
IO-Link yes

Adjustable parameters

Output Push-pull
Circuit NC
Error output
Other parameters Off-delay
Emitted light
Teach mode
Switching point
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Table 1

Working Distance 100 mm 500 mm 1000 mm
Light Spot Diameter 4 mm 7 mm 15 mm

Connection Diagram

Switching Distance Deviation

Typical characteristic curve based on white, 90 % remission
Sr = Switching Distance
dSr = Switching Distance Change
black 6 % remission
grey 18 % remission

Ctrl. Panel

68 = supply voltage indicator
06 = Teach Button
5a = Switching Status Display, O1
6a = Switching Status Display, O2

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode 2 = Receiver Diode Screw M3 = 0,5 Nm

Complementary Products

  • IO-Link Master
  • Software
Initial start-up instructions
Operating instructions
Product description file
Product description file
Interface protocol
Interface protocol
Declarations of Conformity / Approvals
Product certificates
Product certificates

World of Innovations

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison