LBBR601 Flat Light red light, 600 × 600 mm

通常在收到订单后的5天内发货。

已添加到您的购物车：

已添加您的询价单：

wenglor LBB backlights are ideally suited for Vision applications (e.g. silhouette lighting) in areas from 200 × 200 mm. They can be used in continuous mode or synchronized with the Machine Vision Camera in strobe mode via PNP or NPN inputs. Thanks to their diffused light, the backlights are ideal for applications with transmitted light or incident light. The illumination is extremely homogeneous with very small edges (4°mm), so the usable surface is very large and integration is very easy – thanks, among other things, to the T-slot mounting and anchor point on the entire housing of the illumination.

Features at a Glance

High homogeneity
No external control required
High performance: high intensity even in continuous mode
Easy and flexible installation

技术数据

Optical Data
Light Source	LED, red
Wavelength	630 nm
Risk Group (EN 62471)	0
Red light output	144 W/m²

Environmental conditions
Temperature Range	-10 ... 40 °C
Storage temperature	-20 ... 60 °C

Electrical Data
Supply Voltage	21.6 ... 26.4 V DC
Power	204 W
Current Consumption Continuous Mode (Ub = 24 V)	8.5 A
Rise time	15 µs
Fall time	10 µs
Input signal	NPN PNP
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Protection Class	III
Dimming	0....10 V ≙ 100...30%
OverDrive	no

Mechanical Data
Luminous Field Length (L)	600 mm
Luminous Field Width (W)	600 mm
Luminous Field	600 × 600 mm
Housing Material	Aluminum, anodised Plastic, ABS-GF
Degree of Protection	IP50
UL Enclosure Type	1
Optic Cover	Plastic, PMMA
Connection	M12 × 1; 5-pin
Max. cable lenght	10 m
重量	7,000 g