wenglor sensoric gmbh :: Technische Daten

Switch with PoE

ZAC50PN02

2 Digital I/O ports
2 PoE-capable ports
4 Industrial Ethernet ports
High protection class IP67
Rugged aluminium housing

This switch allows simple connecting of up to four industrial Ethernet products. Two PoE-capable ports supply connected devices with the needed power. In addition, PNP sensors and actuators can be connected via two digital I/O ports.

Electrical Data

Supply Voltage	18...32 V
Power consumption of device max.	0,25 A
Power consumption of system max.	2 A
Max. PoE Capacity	25 W
Max. Switching Current Switching Outputs	0,6 A
max. total current of the digital I/O ports	1 A
Switching Output Voltage Drop	< 2,5 V
Temperature Range	-25...60 °C
Digital I/O ports short circuit protected	yes
Digital I/O ports overload protected	yes
Digital I/O ports reverse polarity protected	yes
PoE Ports	2
Number of digital I/O ports	2
Supported PoE Standard	IEEE802.3af
Supported PoE Classes	Class 0, 1, 2, 3
Baud Rate	10/100 Mbit/s
Transmission Mode	Full / Half Duplex
Switch Mode	Store & Forward
VLAN Prioritization	yes
Auto-Crossover	yes
Auto-Negotiating	yes
Auto-Polarity	yes
Interface	PROFINET
Protection Class	III

Mechanical Data

Material	Aluminum
Weight	870 g
Degree of Protection	IP67
Type of Connection Power	2 × 7/8", 5-pin
Type of Connection Industrial Ethernet Ports	2 × M12; 4-pin
Type of Connection PoE Ports	2 × M12; 8-pin
Type of connection digital I/O ports	2 × M12; 4-pin