Individual Safety Light Barrier Control Unit
SS2-00VA000R2
* PFHd for control incl. 4 SL2
- Connection of up to 4 Through Beam Sensors
- Monitoring of external safety relays
- Potential-free safety relay outputs
The individual safety light barrier control unit is used to monitor up to 4 through-beam sensors. Interruption of any single beam results in deactivation of the safety output.
Electrical Data
| Supply Voltage | 24 V DC |
| Current Consumption (Ub = 24 V) | < 260 mA |
| Response Time | < 30 ms |
| Temperature Range | 0...55 °C |
| Switching Output Voltage Drop | < 3 V |
| PNP Switching Output/Switching Current | < 100 mA |
| Relay Output/Switching Current (250 VAC) | 2 A |
| Safety Output | Relay |
| No. Safety Outputs | 2 |
| Reverse Polarity Protection | yes |
| Protection Class | II |
Mechanical Data
| Housing Material | Plastic PA |
| Degree of Protection | IP20 |
| Connection | Screw Clamp |
Safety-relevant Data
| Safety Category (EN ISO 13849-1) | 2 |
| Performance Level (EN ISO 13849-1) | PL d |
| PFHd | 3,16 × E-7 1/h * |
| Safety Integrity Level (EN 61508) | SIL2 |
| Safety Integrity Level (EN 62061) | SILCL2 |
Function
| Restart Inhibit | yes |
| Contactor Monitoring | yes |
Connection Table
Safety Key Figure T10d
Ctrl.Panel
- 71 = Channel 1
- 72 = Channel 2 / Error Indicator
- 73 = OSSD / Diagnosis
Dimensioned Picture
All dimensions in mm (1 mm = 0.03937 Inch)
Complementary Products
| Through Beam Sensor SL2-00NS000H2 / SL2-00NE000H2 |
| Through Beam Sensor SL2-00TS000H2 / SL2-00TE000H1 |
Data sheet
CAD Data
Software
Complementary Products