Relay Unit Type 2/Type 4
SG4-00VA000R2
- 4 relay contacts
- Potential-free load interruption
- Switching Status Indicator
- Terminal Block
In combination with the Safety Light Barriers SG-I and Safety Light Arrays SB-I, the relay unit allows for the interruption of safety-relevant circuits.
Floating safety relays are utilized.
Floating safety relays are utilized.
Electrical Data
| Response Time | 8 ms |
| Temperature Range | -20...50 °C |
| Relay Outputs | 2 × 2 |
| Relay Output/Switching Current (max.) | 4 A |
| Protective Insulation, Rated Voltage | 250 V |
Mechanical Data
| Housing Material | Plastic PA |
| Degree of Protection | IP20 |
| Connection | Terminal Block |
| Conductor cross-section | 0,25...2,5 mm² |
Safety-relevant Data
| Safety Category (EN ISO 13849-1) | 4 |
| Switching cycles B10d (230 VAC / 3 A) | 300 000 |
| Switching Cycles B10d (24 VDC / 4 A) | 200 000 |
| Switching Cycles B10d (24 VDC / 2 A) | 1 000 000 |
| Switching Cycles B10d (mechanical) | 40 000 000 |
Output
| NO | yes |
Connection Table
Ctrl.Panel
- 71 = Channel 1
- 87 = Channel 2
Dimensioned Picture
All dimensions in mm (1 mm = 0.03937 Inch)
Data sheet
CAD Data
Software